ORACLE Oculus BI-LED Projector Headlights - Heated Lens

 

The ORACLE Oculus BI-LED Projector Headlights - Heated Lens combine focused projector illumination with an automatic lens-heating system for customers who drive through snow, ice, and freezing moisture. Modern LEDs produce less forward heat than halogen lamps, so winter accumulation can remain on the outer lens and block otherwise powerful light. The heated Oculus design addresses that problem while retaining the controlled beam pattern, halo styling, and clean vehicle-specific fit of the standard projector system.

A pair delivers 5,200 lumens of 5500K pure-white light through dedicated BI-LED projectors, with each headlight drawing 36 watts. The optical system produces a sharp cutoff that places usable illumination on the road or trail and helps limit glare above the beam when correctly aimed. This disciplined pattern is valuable in blowing snow and wet winter darkness, where scattered light can reflect back toward the driver and reduce visual contrast.

The lens heater activates automatically when the headlights are on and ambient temperature approaches freezing. An amber status LED confirms heater operation, while integrated temperature sensors regulate output and cycle the system to maintain an effective lens temperature. The heating pattern is positioned to avoid blocking the main projector output, allowing the de-icing function to work without placing a heavy visual grid across the primary beam area.

An external temperature sensor provides the environmental reading used by the heater control system and should be mounted near the grille where it receives clean airflow with limited engine-heat influence. On supported applications, the heater itself requires no separate switch or added driver input. Once the headlights are connected, the system responds automatically as conditions change, helping maintain visibility without adding another task during winter travel.

The headlight assemblies also use internal fans and remote heat sinks to manage LED operating temperature, balancing cold-weather lens heating with dependable projector cooling. More than 200 halo LEDs create a vivid perimeter light on supported versions, and the vehicle-specific housings use factory connectors and original mounting locations. The Bronco design adds modular components, while the Jeep arrangement provides a direct integrated replacement for compatible factory lamps.

DOT and SAE certified optics, plug-and-play integration, and a two-year warranty make the heated Oculus system a comprehensive winter-focused upgrade rather than an add-on heater attached to a basic lamp. Whether customers are upgrading for snow-country commuting, winter trail travel, freezing rain, or stronger all-weather headlight performance, the ORACLE Oculus BI-LED Projector Headlights - Heated Lens deliver focused illumination with automatic de-icing support. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Vehicle-specific heated-lens BI-LED projector headlight pair

Brand: ORACLE Lighting

Total Output: 5,200 lumens per pair

Power: 36 watts per headlight

Color Temperature: 5500K pure white

Optics: Precision BI-LED projector with sharp cutoff

Heater Activation: Automatic when headlights are on and temperature approaches freezing

Heater Indicator: Amber status LED

Temperature Control: Integrated sensors cycle the heater to maintain lens temperature

Cooling: Internal active fan and passive remote heat sinks

Halo: More than 200 LEDs on supported applications

Compliance: DOT and SAE certified optics

Vehicle Fitment: Select Jeep and Ford Bronco applications

Functionality:

• Provides focused low and high beams through BI-LED projector optics
• Automatically heats the outer lens as temperatures approach freezing
• Helps reduce snow and ice buildup that can block LED headlight output
• Uses an external sensor to monitor ambient conditions
• Cycles heater operation without requiring a separate driver switch
• Maintains LED performance through active and passive cooling
• Supports winter road travel, cold-weather trail use, and lifted off-road SUV builds

 

---

 

Why Choose

This product is ideal for customers who want projector-grade LED visibility with automatic protection against winter lens accumulation.

• The heated lens addresses snow and ice buildup that ordinary LED headlights may not melt
• Automatic activation allows the system to respond without manual heater control
• A sharp projector cutoff improves usable visibility and helps control glare
• 5,200 lumens per pair provide strong road and trail illumination
• Factory-connector integration keeps the installation clean on supported vehicles
• Active and passive cooling support dependable LED operation during extended use
• A two-year warranty supports the complete headlight and heated-lens system

 

---

 

What's Included

• Two ORACLE Oculus BI-LED projector headlight assemblies with integrated heated lenses
• Integrated BI-LED projectors and halo components
• External temperature-sensing components for the heater system
• Headlight angle adjustment tool
• Application-specific installation hardware and modular components where required

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm vehicle application, factory lighting package, connector style, and all application-specific mounting requirements before installation.
• Mount the external temperature sensor near the grille with good airflow and minimal exposure to engine heat.
• Connect the headlights through the factory electrical system, secure remote heat sinks, and protect wiring from heat, abrasion, moisture, and moving parts.
• Aim the projector cutoff after installation and test the amber heater indicator under suitable cold conditions.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

ORACLE Lighting provides a two-year limited warranty for qualifying heated Oculus BI-LED projector headlight applications, covering eligible defects in materials and workmanship.

Coverage typically excludes improper installation, sensor placement near excessive engine heat, wiring faults, blocked cooling components, collision damage, unauthorized modification, or misuse. Proof of purchase may be required for warranty service.