LOGIQ AirIQ SD1 Air Management Package

 

LOGIQ AirIQ SD1 Air Management Package gives customers a simple, app-controlled way to manage load-leveling air suspension and helper bag pressure. Built for trucks and SUVs that tow, haul, carry gear, or move between loaded and unloaded driving, the SD1 package helps customers adjust both air springs together from a compatible mobile device. It is the most approachable AirIQ package for customers who want Bluetooth air management with a standard-duty compressor and single-channel control.

The SD1 system uses single-channel valving to control both air springs together, making it a practical match for customers who want straightforward pressure adjustment without independent side-to-side tuning. This layout works well for common towing, cargo, and leveling needs where both rear air springs can be adjusted at the same time. Customers can add or release air through the AirIQ app to help the vehicle sit more level and feel more controlled under changing load conditions.

LOGIQ pairs the SD1 air management system with a standard-duty compressor that supports dependable air delivery for everyday load-leveling use. The compressor is rated at 2.03 CFM at 0 psi with a 25 percent duty cycle, giving customers onboard air support for routine pressure changes. For drivers who want convenient air spring control without stepping up to a dual-channel or heavy-duty compressor package, the SD1 system keeps the setup focused and efficient.

The complete AirIQ package is factory assembled and tested to help reduce installation complexity and support dependable operation. Instead of requiring customers to build an air management system from separate major components, the SD1 package arrives as a more complete solution with the core system, compressor, mounting, wiring, plumbing, and air line components needed for installation. That pre-assembled approach helps customers move from manual air adjustment to app-based control with less guesswork.

The system is designed for 12-volt vehicle electrical systems and uses IP67-rated components for durability in vehicle-mounted environments. That protection is useful for trucks and SUVs where air management components may be exposed to road spray, dirt, and changing weather conditions. Proper mounting, careful routing, and leak checks remain important so the compressor, wiring, and air lines can perform reliably after installation.

The LOGIQ AirIQ SD1 Air Management Package is a smart choice for customers who want app-based pressure control, combined rear air spring adjustment, and a complete standard-duty onboard air package. Whether customers are upgrading for towing, hauling, load leveling, daily cargo support, work truck use, or easier suspension pressure changes, the LOGIQ AirIQ SD1 Air Management Package delivers convenient 1-channel air management in a ready-to-install package. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: 1-channel air management package

Brand: LOGIQ

Series: AirIQ SD1

Control Type: Bluetooth control through the AirIQ app

Channel Layout: Single-channel control for both air springs together

Compressor Type: Standard-duty air compressor

Compressor Output: 2.03 CFM at 0 psi

Compressor Duty Cycle: 25 percent

System Design: Factory assembled and tested

Ingress Protection Rating: IP67 rated components

Voltage: 12 volts

Functionality:

• Provides app-based pressure control for compatible load-leveling air spring systems
• Controls both rear air springs together through a single-channel air management layout
• Helps reduce rear suspension sag when the vehicle is loaded with cargo or trailer tongue weight
• Supports quick pressure changes for towing, hauling, work, travel, and daily driving
• Standard-duty compressor supports routine onboard air management needs
• Factory assembled and tested package helps simplify installation compared with pieced-together systems
• Bluetooth control gives customers a convenient way to adjust pressure from a compatible mobile device
• IP67-rated components help support durability in demanding vehicle-mounted environments

 

---

 

Why Choose

This product is ideal for customers who want simple app-based air spring control with a standard-duty compressor and 1-channel operation.

• Single-channel control keeps pressure adjustment straightforward for customers who want both air springs managed together
• AirIQ app control makes suspension support easier to adjust compared with manual inflation valves alone
• Standard-duty compressor provides onboard air support for everyday towing, hauling, and cargo changes
• Pre-assembled system design helps reduce installation guesswork and component matching
• Helps customers level the vehicle more easily when cargo, tools, gear, or trailer weight is added
• Useful for daily drivers, tow rigs, work trucks, weekend haulers, and road-trip vehicles
• IP67-rated components help support confidence for frame-mounted and vehicle-mounted use
• Gives customers an efficient entry point into LOGIQ AirIQ air management without requiring dual-channel control

 

---

 

What's Included

• LOGIQ AirIQ SD1 air management system
• Standard-duty air compressor
• 1-channel Bluetooth air management control system
• Frame mounting brackets
• Frame mounting hardware kit
• AirIQ SD1 installation kit
• Air line for system installation
• Plumbing kit and wiring components

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm compatibility with the selected air spring or helper bag system before installation.
• Mount the system in a secure location that protects the compressor, wiring, air lines, and control components while allowing service access.
• Route air lines and wiring away from exhaust heat, sharp edges, moving suspension parts, steering components, and pinch points.
• After installation, check electrical connections, app communication, compressor operation, air line routing, and all air fittings for leaks before regular use.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

LOGIQ air suspension and air management products are generally supported by warranty coverage for qualifying components, with coverage subject to proper installation, normal use, and proof of purchase requirements. Air compressor warranty coverage may differ from other air management components.

Warranty coverage typically excludes improper installation, misuse, modifications, electrical issues, overloading, tampering, impact damage outside warranty terms, or non-compliant use. Confirm current warranty terms before installation or claim submission.