Baja Designs XL Pro Bumper Light Kit

 

The Baja Designs XL Pro Bumper Light Kit adds a matched pair of rectangular auxiliary lights to the front bumper of compatible Jeep builds with the original steel bumper. The vehicle-focused brackets place the lamps in a clean elevated position where they can support nighttime trail travel, remote road access, campsite approaches, and general off-road visibility. Customers receive a coordinated bumper package instead of adapting universal brackets and separate electrical parts.

Each XL Pro light uses Baja Designs high-speed spot reflectors and Driving/Combo optics to blend distance with a smooth surrounding spread. The pattern helps customers identify terrain farther ahead while maintaining useful awareness around the primary beam. The compact XL housing delivers strong forward performance without requiring a full-width light bar across the bumper or grille.

The current light specification provides 4,095 raw lumens at 41 watts and 3 amps per pod, together with a 20 percent dimming capability when compatible controls are used. Hard anodized and powder coated cast aluminum housings, hardcoated polycarbonate lenses, stainless steel hardware, built-in overvoltage protection, and serviceable optics support repeated off-road use. The black finish works naturally with the steel bumper and other dark front-end hardware.

The kit is tested around the intended bumper geometry and includes brackets that align the two lights for a balanced appearance. Driving/Combo Clear optics provide neutral 5000K output for mixed terrain and variable speeds. The installation keeps both lights forward-facing and allows final aiming after the brackets and bumper hardware are secured.

Wiring is designed for factory auxiliary-switch systems or compatible power-distribution controls such as sPOD or Switch Pros equipment. Customers should confirm the available switch system, connector layout, circuit capacity, and fuse protection before installation. This package is intended for the original steel bumper, so bumper style and accessory clearance must be verified before purchase.

The Baja Designs XL Pro Bumper Light Kit suits customers who want Pro-level bumper lighting with vehicle-focused brackets and a clean two-light layout. It supports technical trails, faster open sections, remote travel, and utility tasks while preserving the recognizable front-end shape of the vehicle. Whether customers are upgrading for trail distance, mixed-terrain coverage, or a coordinated steel-bumper installation, the Baja Designs XL Pro Bumper Light Kit delivers balanced XL Pro performance from a matched pair. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Vehicle-specific front bumper auxiliary light kit

Brand: Baja Designs

Series: XL Pro

Vehicle Fitment: Jeep Wrangler JL 2018-2026 and Jeep Gladiator JT 2020-2026 with original steel bumper

Light Quantity: Two XL Pro LED light pods

Beam Pattern: Driving/Combo

Lens Color: Clear

Output Per Light: 4,095 raw lumens

Power Draw Per Light: 41 watts at 3 amps

Lighting Mode: High beam with 20 percent dimming capability

Housing: Hard anodized and powder coated cast aluminum

Lens: Hardcoated polycarbonate

Mounting: Vehicle-specific bumper brackets and stainless steel hardware

Wiring Compatibility: Designed for factory auxiliary switches or compatible power-distribution controls

Service Features: Built-in overvoltage protection with replaceable lenses and optics

Functionality:

• Adds a balanced pair of forward lights to the original steel bumper.
• Combines distance and surrounding width through Driving/Combo optics.
• Supports trail travel, remote roads, campsites, and utility use after dark.
• Preserves grille and roof space by keeping the lights on the bumper.
• Uses vehicle-focused brackets for a coordinated appearance.
• Supports factory auxiliary switches and compatible power-distribution controls.
• Provides dimming capability when paired with appropriate control hardware.
• Uses serviceable XL Pro optics for long-term maintenance flexibility.

 

---

 

Available Options

The Baja Designs XL Pro Bumper Light Kit is offered with wiring arrangements intended for different control systems:

• Factory Auxiliary Switch Wiring - Connects the bumper lights through compatible factory auxiliary-switch circuits when the vehicle is equipped and the circuit capacity is appropriate.
• Power-Distribution Wiring - Supports compatible sPOD or Switch Pros style control systems for customers using an aftermarket centralized accessory controller.
• Driving/Combo Clear Lights - Provides the same balanced beam and neutral 5000K output in each wiring arrangement.

Choose the wiring arrangement that matches the installed switch or power-distribution system. Both versions use the same pair of clear Driving/Combo XL Pro lights and vehicle-specific steel-bumper brackets.

 

---

 

Why Choose

This product is ideal for customers who want a matched pair of XL Pro lights with clean vehicle-specific steel-bumper mounting.

• Provides strong forward illumination without adding a full-width light bar.
• Uses Driving/Combo optics for both distance and useful surrounding spread.
• Includes brackets designed around the intended original steel bumper.
• Supports compatible factory or aftermarket accessory-control systems.
• Offers dimming capability when the correct controls are installed.
• Uses rugged housing, lens, and hardware materials for repeated off-road use.
• Includes serviceable lenses and optics for long-term ownership.
• Creates a balanced left and right appearance at the front bumper.

 

---

 

What's Included

• Two Baja Designs XL Pro Driving/Combo Clear LED light pods
• Vehicle-specific steel-bumper mounting brackets
• Wiring components for the selected control arrangement
• Necessary mounting hardware
• Installation documentation

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm vehicle year, original steel-bumper fitment, and clearance around recovery points and other accessories before installation.
• Match the selected wiring to the installed factory auxiliary switches or compatible power-distribution controller.
• Verify circuit capacity, fuse protection, connector engagement, cable routing, and grounding before power is applied.
• Aim both Driving/Combo lights after the brackets and bumper hardware are fully tightened.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs backs qualifying XL Pro lighting products with a limited lifetime warranty against covered defects in materials and workmanship under the applicable terms, together with a 30-day satisfaction guarantee. Replaceable lenses and optics support approved service.

Warranty coverage typically excludes improper installation, incorrect bumper application, unsuitable wiring, circuit overloading, misuse, unauthorized modification, tampering, neglect, or impact damage outside the warranty terms. Proof of purchase may be required.