Baja Designs Vertical Light Mount - Black

Baja Designs Vertical Light Mount - Black provides a clean clamp-style location for mounting compatible Baja Designs LED lights to a vertical roll-cage or rack tube. The black anodized appearance coordinates with common roll cages, racks, and powersports accessories while the angled bracket creates a flat platform for the light. This solution helps customers add lighting without welding a permanent tab to the cage or relying on a universal bracket that does not match the tube diameter.

The vertical layout is shaped for a vertical roll-cage or rack tube and positions the light on a stable platform that can be aimed for the intended coverage. Customers can use the mount for forward, cornering, side, reverse, work, or scene lighting depending on the selected light and bracket location. The predrilled 10mm light-mounting hole accepts compatible hardware and gives the installation a defined attachment point.

Three clamp sizes match common cage and bar diameters: 1.5 inch, 1.75 inch, and 2 inch. Correct size selection is essential because a clamp that is too large can move under vibration, while a clamp that is too small can damage hardware or fail to seat correctly. Customers should measure the outside diameter of the actual tube with a suitable tool rather than selecting from the vehicle description alone.

Stainless steel mounting material supports outdoor use, and the black anodized finish creates a low-profile appearance around the cage. The mount can help preserve bumpers, roofs, and body panels for other equipment while using existing tube structure as the lighting foundation. Final strength depends on tube condition, clamp fit, fastener torque, light weight, vibration, leverage, and the direction of impact loads.

Installation planning should include clearance for doors, nets, windshields, roofs, occupants, cargo, suspension travel, steering movement, and removable panels. Wiring should follow the cage or nearby protected structure with enough slack for service but no loose loops that can snag. After the light is aimed, customers should verify clamp position and fastener torque again following the first ride or work cycle.

This mount supports UTVs, powersports vehicles, roll-cage equipment, racks, and custom tube structures when the diameter and installation conditions are compatible. It gives customers a focused way to position a compact light while keeping the overall build clean and serviceable. Whether customers are upgrading for trail visibility, side coverage, rear work lighting, or campsite illumination, the Vertical Light Mount - Black delivers size-matched tube mounting with a flat, aimable light platform. Now Available at LEER!

Features & Specifications

Product Type: Vertical tube light mount

Brand: Baja Designs

Mount Sizes: 1.5 inch, 1.75 inch, or 2 inch

Light-Mounting Hole: 10mm

Material: Stainless steel

Finish: Black anodized appearance

Application: A vertical roll-cage or rack tube

Functionality:

• Clamps a compatible LED light to a vertical roll-cage or rack tube
• Creates a flat mounting platform on a round tube
• Supports forward, cornering, side, rear, work, and scene-light positions
• Offers three sizes for common cage and bar diameters
• Avoids welding a permanent light tab to the tube
• Preserves other vehicle surfaces for additional accessories
• Allows the light to be aimed after the clamp location is established

Available Options

The Vertical Light Mount - Black is available in multiple configurations:

• 1.5 Inch Mount - Fits a compatible 1.5 inch outside-diameter tube and provides a predrilled 10mm light-mounting point.
• 1.75 Inch Mount - Fits a compatible 1.75 inch outside-diameter tube and provides a predrilled 10mm light-mounting point.
• 2 Inch Mount - Fits a compatible 2 inch outside-diameter tube and provides a predrilled 10mm light-mounting point.

Choose the 1.5 inch, 1.75 inch, or 2 inch mount only after measuring the outside diameter of the intended tube and confirming clearance for the selected light.

Why Choose

This product is ideal for customers who want a size-matched tube clamp with a clean, aimable light platform.

• Three diameter choices support common powersports cage and rack tubing
• Angled bracket creates a practical flat light-mounting surface
• Predrilled 10mm hole simplifies compatible light attachment
• Black appearance blends with common cage and accessory finishes
• Clamp-style installation can remain serviceable and removable
• Tube mounting preserves bumper, roof, and body-panel space
• Purpose-shaped orientation supports a cleaner installation than a generic bracket

What's Included

• One Vertical Light Mount - Black in the selected tube size
• Mount hardware supplied with the selected product

Note: Confirm included components before installation.

Installation Notes

• Measure the tube outside diameter before selecting the mount size
• Confirm clearance for occupants, doors, nets, windshields, roofs, cargo, steering, and suspension movement
• Use compatible light hardware and route wiring along protected structure with strain relief
• Recheck clamp position and fastener torque after the first ride or work cycle

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

Warranty Information

Warranty coverage is subject to Baja Designs terms in effect at the time of purchase and may require proof of purchase. Coverage typically excludes improper installation, misuse, modification, electrical faults, overloading, tampering, impact damage, and use outside the intended application.

Customers should inspect the accessory and the surrounding installation periodically, especially after off-road travel, vibration, weather exposure, or changes to the lighting system. Correct routing, secure fasteners, compatible connectors, and proper electrical capacity help preserve reliable operation.