Baja Designs S1 Dual Reverse Light Kit

 

The Baja Designs S1 Dual Reverse Light Kit gives compatible SUV builds a clean rear-lighting upgrade centered on two compact S1 LED pods. It is designed for customers who need more usable visibility behind the vehicle while reversing on dark trails, positioning at a campsite, checking obstacles, or working around the rear cargo area. The vehicle-specific layout keeps the lighting close to the spare-tire area instead of relying on a large exposed light bar.

Each S1 pod delivers 2,320 raw lumens from a compact 2.1-inch housing, allowing the kit to add substantial rear-facing illumination without dominating the back of the vehicle. Clear Wide Cornering optics spread the beam across the area behind and beside the vehicle, helping reveal uneven ground, trail edges, recovery gear, campsite equipment, and other close-range hazards. The broad pattern is especially useful for low-speed maneuvering where peripheral coverage matters more than a narrow long-distance beam.

The included spare-tire-area bracket positions the lights within the rear-mounted spare layout for a tidy, purpose-built appearance. Black rock guards help protect the front of the pods and give the installation a finished look that coordinates with common bumper, wheel, and accessory finishes. Customers can add rear visibility while preserving the vehicle's rugged styling and keeping the lights positioned for practical reverse and utility use.

Baja Designs builds the S1 platform with a hard-anodized and powder-coated cast aluminum housing, a hardcoated polycarbonate lens, and stainless steel mounting hardware. The compact pods carry IP69K water resistance, IK10 impact compliance, and durability testing beyond MIL-STD810G, supporting use around rain, dust, mud, vibration, pressure washing, and demanding trail conditions. Built-in overvoltage protection and a 9-28V operating range add confidence for properly planned vehicle wiring.

Wiring and rear-mount choices allow the kit to suit different compatible vehicle setups. Toggle-switch and upfitter-harness versions support different control preferences, while an available license plate mount accommodates installations that need an integrated plate solution near the spare tire. The selected kit should be matched to the vehicle's equipment package because certain high-clearance and performance-oriented configurations use rear hardware that is not compatible with this bracket system.

The result is a compact dual-light system that supports trail reversing, nighttime recovery, campsite setup, cargo access, and rear work illumination without adding unnecessary bulk. Whether customers are upgrading for dark-trail maneuvering, campsite visibility, recovery work, or improved rear-area awareness, the Baja Designs S1 Dual Reverse Light Kit delivers broad illumination in a clean vehicle-specific package. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Vehicle-specific dual reverse light kit

Brand: Baja Designs

Light Series: S1

Light Quantity: Two S1 LED light pods

Beam Pattern: Wide Cornering

Lens Color: Clear

Light Output: 2,320 raw lumens per light

Power Draw: 19.596W and 1.420A per light

Voltage Range: 9-28V

Housing: Hard-anodized and powder-coated cast aluminum

Lens: Hardcoated polycarbonate

Mounting Hardware: Stainless steel

Dimensions: 2.1 inches long, 2.1 inches high, and 2.1 inches deep per pod

Durability: Exceeds MIL-STD810G testing; IK10 impact compliant; IP69K water resistant

Vehicle Fitment: Select spare-tire-equipped SUV applications; confirm trim compatibility

Functionality:

• Adds a balanced pair of rear-facing lights for clearer low-speed maneuvering after dark
• Spreads light across the rear zone with Wide Cornering optics instead of a narrow distance-focused beam
• Supports trail reversing, obstacle checks, campsite setup, recovery work, and cargo-area tasks
• Mounts within the spare-tire area for a compact appearance that avoids a bulky external light bar
• Uses black rock guards to protect the lens fronts and complete the installed appearance
• Offers toggle-switch or upfitter-harness control to match compatible vehicle wiring preferences
• Supports an available license plate mount for rear layouts that need an integrated plate solution
• Combines compact pod dimensions with rugged housing, lens, and hardware construction

 

---

 

Available Options

The Baja Designs S1 Dual Reverse Light Kit is available with wiring and rear-mount choices for compatible installations:

• Toggle Switch Without License Plate Mount -- Provides direct switched control for customers whose rear layout does not require an integrated plate mount.
• Toggle Switch With License Plate Mount -- Combines direct switched control with a rear license plate mounting solution near the spare-tire bracket.
• Upfitter Harness Without License Plate Mount -- Connects through compatible factory-style auxiliary switch wiring while retaining the standard rear bracket layout.
• Upfitter Harness With License Plate Mount -- Pairs compatible auxiliary switch wiring with the integrated license plate mounting solution.

Choose the toggle-switch version for dedicated manual control, or choose the upfitter-harness version for a compatible factory auxiliary switch system; add the license plate mount when the rear layout requires it.

 

---

 

Why Choose

This product is ideal for customers who want wide rear visibility from compact lights mounted neatly within a spare-tire-equipped rear layout.

• Two S1 pods provide balanced illumination across the area behind the vehicle
• Compact housings fit a clean rear mounting solution without an oversized light bar
• Wide Cornering optics help reveal trail edges, obstacles, equipment, and nearby terrain
• Vehicle-specific bracket placement creates a more integrated appearance than many universal installations
• Rugged aluminum housings, polycarbonate lenses, and stainless hardware support demanding use
• Multiple wiring choices help match the kit to compatible switch and electrical systems
• An available license plate mount supports rear layouts that need a relocated or integrated plate position
• Rock guards add protection and a finished black appearance

 

---

 

What's Included

• Two Baja Designs S1 LED light pods with clear Wide Cornering optics
• Spare-tire-area auxiliary light bracket
• Black S1 rock guards
• Selected toggle-switch or upfitter wiring components
• License plate mount when selected
• Stainless steel mounting hardware
• Installation instructions

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm the vehicle, model year, trim, spare-tire setup, and rear accessories are compatible before installation; Bronco Raptor and Sasquatch configurations are excluded from the referenced bracket fitment.
• Select the correct toggle-switch or upfitter-harness version before routing power, ground, switching, and rear extension wiring.
• Verify spare-tire, camera, license plate, bumper, and tailgate clearances through the full range of normal operation before tightening the bracket.
• Aim both lights downward and across the rear work zone so they improve visibility without producing unsafe glare.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs lighting products are supported by a limited lifetime warranty for qualifying defects in materials and workmanship, along with a 30-day satisfaction guarantee under the brand terms in effect at the time of purchase.

Warranty coverage may exclude improper installation, wiring faults, misuse, modifications, collision or impact damage outside the warranty terms, tampering, or non-compliant use. Proof of purchase may be required for service or replacement claims.