Baja Designs XL-R 80 LED Auxiliary Light Pod

 

Baja Designs XL-R 80 LED Auxiliary Light Pod is a high-output round-bezel light for customers who need substantial illumination across open terrain, demanding trails, remote work areas, and fast nighttime routes. The XL housing provides the optical capacity of a larger performance pod while the round outer face creates a traditional auxiliary-light appearance. Its combination of output, width, and distance makes it a strong primary lighting layer for vehicles that regularly travel beyond the reach of factory lamps.

Next-generation LED technology produces 9,022 raw lumens per light, and Baja Designs High-Speed Spot reflectors shape that output into a longer, wider beam. The additional intensity helps drivers identify terrain changes, route direction, obstacles, and recovery areas at greater distance. Unlike a narrow race-only spot, the available optical patterns allow the XL-R 80 to deliver either balanced forward coverage or broader cornering illumination depending on the selected lens.

The housing measures approximately 5.24 inches high by 5.24 inches wide and 3.65 inches deep, giving it a bold presence without the depth of many traditional large lamps. This size works well on performance bumpers, roof structures, A-pillars, powersports cages, and custom high-output mounts where a substantial beam is needed. The round bezel integrates cleanly with compatible circular openings and gives the installation a finished, purpose-built appearance.

Driving/Combo and Wide Cornering patterns address the two most useful roles for this output level. Driving/Combo combines downrange projection with width for mixed routes and open terrain, while Wide Cornering shifts more illumination toward turns, trail edges, washes, and technical approaches. Clear and Baja Amber lens choices add another layer of control, allowing customers to favor crisp white output or warmer contrast in dust, fog, rain, and other reduced-visibility environments.

The XL-R 80 includes a 20 percent dimming feature when paired with compatible control hardware, allowing customers to integrate the light into a staged or layered system. Hard-anodized and powder-coated cast aluminum protects the electronics, and a hardcoated polycarbonate lens shields the optical surface from debris. MoistureBlock sealing, built-in overvoltage protection, CopperDrive LED management, stainless hardware, IP69K water resistance, and IK10 impact compliance support demanding off-road and work use.

A single XL-R 80 can anchor a custom lighting layout, while multiple pods can create balanced coverage across the front or upper structure of a vehicle. Proper wiring, mounting, and aiming are essential because the output is substantial and should complement rather than overpower the rest of the lighting package. Whether customers are upgrading for high-speed trails, open desert, remote work, or a high-output round-pod system, the Baja Designs XL-R 80 LED Auxiliary Light Pod delivers intense controlled illumination and rugged construction. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: High-output round LED auxiliary light pod

Brand: Baja Designs

Series: XL-R 80

Light Output: 9,022 raw lumens per light

Power Draw: 80 watts and approximately 5.5 amps per light

LED Quantity: Four forward-projecting LEDs

Beam Patterns: Driving/Combo and Wide Cornering

Lens Colors: Clear and Baja Amber

Lighting Modes: High output with 20 percent dimming capability

Dimensions: 5.24 inches high, 5.24 inches wide, and 3.65 inches deep

Housing: Hard-anodized and powder-coated cast aluminum

Lens: Hardcoated polycarbonate

Rated Life: 49,930 hours

Environmental Ratings: IP69K water resistance and IK10 impact compliance

Wiring Harness: Not included

Functionality:

• Produces high-output illumination for open terrain and demanding nighttime travel.
• Extends useful visibility with High-Speed Spot reflector technology.
• Supports balanced forward coverage or broad cornering illumination.
• Fits performance bumpers, roof systems, pillars, cages, and custom mounts.
• Offers Clear and Baja Amber lenses for different visibility conditions.
• Provides a 20 percent dimming function with compatible control hardware.
• Resists water, impact, vibration, dust, and severe outdoor exposure.
• Uses serviceable lenses and optics for long-term maintenance.

 

---

 

Available Options

The Baja Designs XL-R 80 LED Auxiliary Light Pod is available in beam and lens configurations for different high-output lighting goals:

• Driving/Combo Beam - combines long forward projection with useful width for fast mixed terrain and general off-road travel.
• Wide Cornering Beam - shifts illumination toward the sides for turns, trail edges, washes, and technical approaches.
• Clear Lens - delivers crisp white light for general nighttime visibility and dry conditions.
• Baja Amber Lens - adds warmer output that can improve contrast in dust, fog, rain, and other difficult environments.

Choose Driving/Combo when forward reach and balanced width are the priority, or choose Wide Cornering for broader side coverage; select Clear for crisp white output or Baja Amber for warmer contrast.

 

---

 

Why Choose

This product is ideal for customers who want very high auxiliary output, a traditional round bezel, and optical choices for fast off-road travel.

• The 9,022-lumen output supports visibility needs well beyond standard vehicle lighting.
• High-Speed Spot reflectors deliver both useful distance and a broad controlled beam.
• Driving/Combo and Wide Cornering options address forward and peripheral lighting priorities.
• Clear and Baja Amber lenses help customers adapt the light to dry, dusty, foggy, or wet environments.
• The 20 percent dimming function supports staged operation in layered lighting systems.
• The round bezel integrates cleanly with compatible performance bumper openings.
• Environmental and impact ratings support serious trail, racing, and work use.
• Serviceable optical components help protect the long-term lighting investment.

 

---

 

What's Included

• One Baja Designs XL-R 80 LED auxiliary light pod
• XL mounting bracket
• Stainless steel mounting hardware

Note: Confirm included components before installation.

 

---

 

Installation Notes

• The single light does not include a wiring harness; use compatible Baja Designs control hardware rated for the power demand.
• Confirm the vehicle electrical system, fuse protection, switch capacity, and cable size are appropriate before connection.
• Mount the pod to a rigid surface with enough clearance for adjustment and unobstructed airflow around the housing.
• The 20 percent dimming function requires compatible wiring and a mode-capable control arrangement.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs lighting is backed by a limited lifetime warranty covering qualifying defects in design and manufacturing. Warranty service may involve repair, replacement, or another remedy allowed under the terms in effect at the time of the claim, and proof of purchase may be required.

Coverage generally excludes installation errors, normal wear, misuse, abuse, neglect, collisions, unauthorized modifications, incorrect wiring, tampering, and damage caused by combinations or alterations not completed by Baja Designs. Customers should retain purchase records, follow the supplied installation guidance, and return the light intact when warranty evaluation is required.