Rigid SR-Series PRO LED Light Bar for Trucks & SUVs

 

RIGID SR-Series PRO LED Light Bar is a slim single-row lighting system created for customers who need strong auxiliary output in limited space. Measuring less than 2 inches tall, it fits cleanly into bumpers, grilles, racks, and other compatible locations where a larger dual-row bar may interfere with styling, airflow, or surrounding accessories. The restrained profile makes it equally useful on daily-driven trucks, overland builds, trail vehicles, work equipment, and marine applications.

PRO LED technology increases raw output by as much as 111 percent compared with earlier SR-Series designs, depending on size and optic selection. That improvement gives customers more usable illumination without sacrificing the compact architecture that made the series popular. The bar can support nighttime trail travel, remote-road visibility, campsite access, work-area lighting, and other situations where factory lamps leave dark areas ahead.

A broad selection of beam patterns allows the SR-Series PRO to be matched to the intended use. Spot optics emphasize distance, flood optics expand nearby coverage, driving patterns provide controlled forward light, and combo patterns blend reach with spread. Hybrid and Specter optic systems are used across the range, giving customers purpose-built choices instead of one generic beam for every mounting location.

The wide size range is another practical advantage. Compact 6-inch and 10-inch bars fit bumper pockets, small grille spaces, and focused accessory mounts, while 20-inch and 30-inch models suit mid-size installations. Larger 40-inch and 50-inch bars create broad roof, rack, and front-end lighting layouts while keeping the same low single-row appearance.

High-grade aluminum construction and an integrated thermal management system protect the electronics and control operating heat. An impact-resistant polycarbonate lens helps defend against debris and vibration, and IP68 sealing resists dust and water intrusion. Voltage protection, reverse-polarity protection, a pressure-equalizing vent, and a waterproof connector on applicable models support dependable use across harsh outdoor conditions.

The SR-Series PRO is built for customers who want lighting performance without a bulky enclosure. Its mix of lengths, optics, and beam patterns supports focused long-range setups, broad work illumination, balanced trail lighting, and clean full-width installations. Whether customers are upgrading for tight-space mounting, nighttime trail travel, worksite visibility, or a low-profile roof-rack system, the SR-Series PRO LED Light Bar delivers adaptable output with proven RIGID durability. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Low-profile single-row LED light bar

Brand: RIGID Industries

Series: SR-Series PRO

Profile Height: Less than 2 inches

Available Sizes: 6-inch, 10-inch, 20-inch, 30-inch, 40-inch, and 50-inch

Beam Pattern Options: Spot, flood, driving, and combo, depending on configuration

Optic Systems: Hybrid and Specter, depending on configuration

LED Technology: RIGID PRO LED technology with up to 111 percent more raw lumens than earlier models

Housing Material: High-grade aluminum alloy

Lens Material: Impact-resistant polycarbonate

Ingress Protection: IP68

Operating Voltage: 9-36V DC

LED Lifespan: 50,000 or more hours

Warranty: Limited lifetime

Functionality:

• Adds high-output forward illumination in a compact single-row housing.
• Fits low-clearance spaces where a taller dual-row bar may not integrate cleanly.
• Supports long-range, wide-area, driving, and blended lighting needs through multiple beam patterns.
• Offers six lengths for focused accessory locations and full-width lighting systems.
• Works with compatible bumpers, grilles, roof racks, marine mounts, and custom brackets.
• Uses thermal management and voltage protection to support consistent operation.
• Resists dust and water intrusion with IP68-rated construction.
• Protects the optics from debris and vibration with an impact-resistant polycarbonate lens.

 

---

 

Available Options

The RIGID SR-Series PRO LED Light Bar is available in multiple lengths and beam patterns:

• 6-inch Light Bar -- A compact solution for bumper pockets, grille corners, and focused auxiliary-light locations.
• 10-inch Light Bar -- A small-format bar that adds useful output while keeping mounting demands low.
• 20-inch Light Bar -- A versatile mid-size option for bumpers, racks, and grille guards.
• 30-inch Light Bar -- A balanced choice for wider front-end lighting and stronger overall coverage.
• 40-inch Light Bar -- A large low-profile bar for roof racks and broad bumper installations.
• 50-inch Light Bar -- A full-width option for maximum coverage while retaining a slim single-row look.
• Spot Pattern -- Best for customers who prioritize long-distance projection in open terrain.
• Flood Pattern -- Best for nearby work zones, campsites, and lower-speed wide-area illumination.
• Driving Pattern -- Best for controlled forward auxiliary visibility.
• Combo Pattern -- Best for customers who want distance and side spread in one bar.

Choose a shorter bar for tight mounting spaces or a longer bar for wider coverage, then select spot, flood, driving, or combo optics to match the intended terrain and operating speed.

 

---

 

Why Choose

This product is ideal for customers who want strong auxiliary output, multiple beam choices, and a clean low-profile installation.

• The less-than-2-inch housing fits locations that cannot comfortably accept a taller light bar.
• PRO LED technology provides a major output increase while preserving the single-row design.
• Multiple optic choices let customers prioritize distance, width, or a balanced combination.
• Six lengths support compact accent locations, mid-size bumpers, and full-width roof systems.
• Durable alloy construction protects the lighting system during repeated outdoor use.
• Integrated thermal management helps control heat during extended operation.
• IP68 sealing and an impact-resistant lens support use around rain, dust, mud, and debris.
• A limited lifetime warranty provides long-term product support.

 

---

 

What's Included

• RIGID SR-Series PRO LED Light Bar in the selected length and beam pattern
• Surface-mount brackets
• Mounting hardware
• Wiring harness when supplied with the selected configuration

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm the selected length, optic, mounting width, bracket position, and wiring route before installation.
• Use a properly protected circuit sized for the selected light bar and follow the supplied wiring guidance.
• Route connectors and wiring away from exhaust heat, sharp edges, moving panels, and suspension components.
• Aim the beam after mounting so the chosen pattern supports the intended off-road, work, or auxiliary use.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID SR-Series PRO LED Light Bars are covered by a limited lifetime warranty against qualifying defects in materials and workmanship. Proof of purchase may be required, and coverage is governed by the current terms for the selected product.

Warranty coverage typically excludes improper installation, modified wiring, misuse, tampering, electrical damage, impact damage outside warranty terms, and operation outside the intended application.