RIGID SR-Series PRO 10 Inch Yellow Light Cover

 

RIGID SR-Series PRO 10 Inch Yellow Light Cover gives customers a purpose-built way to cover and protect 20, 30, 40, and 50 inch SR-Series PRO and compatible RDS SR-Series PRO light bars that use 10 inch cover sections while leaving the main light-bar mounting system undisturbed. Each 10 inch modular cover segment follows the compatible lamp profile and can be installed or removed as service, transport, storage, or trail conditions change. The result is a cleaner accessory solution than a loose universal shield and a more finished appearance when the illuminated face is intentionally covered.

The polycarbonate construction creates a durable barrier across the exposed light face, helping reduce direct contact from dust, loose gear, small debris, and routine handling. A properly fitted cover can also help limit cosmetic scuffs while equipment is packed with recovery tools, camping supplies, work gear, or other vehicle accessories. Because the cover is separate from the sealed lamp assembly, customers can replace a worn accessory without disturbing the core light or its electrical connections.

Compatibility is centered on 20, 30, 40, and 50 inch SR-Series PRO and compatible RDS SR-Series PRO light bars that use 10 inch cover sections, so confirming the exact light series and physical size is an important part of selecting the correct accessory. The yellow finish adds a bright, traditional off-road appearance while making a covered lighting section easy to identify during storage, staging, or equipment checks. The dedicated profile also helps the edges sit more evenly around the lamp face, supporting a tidy appearance and straightforward removal when access to the light is needed.

The yellow finish brings a traditional off-road appearance to the lamp face and makes the covered light easy to spot during vehicle inspections or equipment checks. Its bright color works well for customers who want protection that is visually distinct from the dark light housing and surrounding bodywork. The cover can be removed quickly when full access to the original lamp lens is required.

This accessory also makes sense as a spare carried with trail tools, work equipment, camping gear, or long-distance travel supplies. A replacement cover can be installed without rewiring the light, re-aiming the beam, or removing the primary mounting bracket, which keeps routine accessory service focused and efficient. Keeping the lamp face clean before installation helps the cover seat correctly and reduces the chance of trapping grit against the lens area.

For best results, customers should verify light-series compatibility, inspect the cover and lamp for damage, and make sure every retaining edge is fully engaged before vehicle movement. The accessory should be removed or used during lamp operation only as directed for the compatible light and the conditions in which the vehicle is being used. Whether customers are upgrading for light-bar protection, modular coverage, trail preparation, or transport storage, RIGID SR-Series PRO 10 Inch Yellow Light Cover delivers purpose-shaped protection with easy section-by-section service. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: SR-Series PRO light bar accessory

Brand: RIGID Industries

Compatible Lights: 20, 30, 40, and 50 inch SR-Series PRO and compatible RDS SR-Series PRO light bars that use 10 inch cover sections

Cover Size: 10 inch modular cover segment

Cover Color: Yellow

Package Quantity: One cover segment

Material: Polycarbonate

Installation Style: Snap-on modular cover

Functionality:

• Adds a fitted protective layer over the compatible light face during storage, transport, staging, or accessory-lighting downtime
• Helps reduce direct contact from loose equipment, dust, small debris, and routine handling around the lamp lens
• Preserves the existing light housing, mounting bracket, wiring route, and beam aim because the cover installs as a separate accessory
• Supports quick removal when customers need direct access to the original lamp lens or normal light operation
• Provides a cleaner appearance than a loose universal shield, bag, tape, or improvised protective material
• Works well as a replacement for a worn cover or as a spare carried with work, travel, recovery, and trail equipment
• Helps keep accessory service simple by avoiding disassembly of the sealed lighting unit
• Matches the intended RIGID light shape for more consistent edge alignment and a finished installed appearance

 

---

 

Why Choose

This product is ideal for customers who want a purpose-shaped protective accessory for 20, 30, 40, and 50 inch SR-Series PRO and compatible RDS SR-Series PRO light bars that use 10 inch cover sections.

• Protects the compatible lamp face without replacing the full lighting assembly
• Keeps brackets, wiring, switching, and established beam aim undisturbed during routine cover changes
• Installs and removes more cleanly than improvised storage or transport protection
• Provides a model-specific shape that supports a neat, purpose-built appearance
• Offers a practical spare-part option for customers who travel, work, camp, or drive off-road
• Helps limit cosmetic contact from packed gear and normal handling around the light face
• Makes it easy to refresh a worn accessory while continuing to use the existing lamp
• Supports organized vehicle preparation before transport, trail use, work assignments, or seasonal storage

 

---

 

What's Included

• One cover segment for the compatible light application

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm compatibility with 20, 30, 40, and 50 inch SR-Series PRO and compatible RDS SR-Series PRO light bars that use 10 inch cover sections and verify the required cover size before installation.
• Clean and inspect the lamp face, housing edge, and cover before fitting the accessory so dirt is not trapped against the lens area.
• Use the number of 10 inch sections required by the compatible bar length and confirm every segment is fully seated.
• Remove the cover or operate the light through it only as directed for the compatible lamp and intended use.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Warranty coverage for this RIGID accessory is subject to the terms that apply to the product at the time of purchase. Proof of purchase may be required, and the accessory may need to be inspected before a claim is approved.

Warranty coverage typically excludes improper installation, misuse, modifications, tampering, chemical damage, excessive abrasion, impact damage outside warranty terms, normal cosmetic wear, or use with an incompatible light. Customers should retain purchase documentation and follow the applicable care and installation requirements.