RIGID RDS SR-Series PRO 11 Inch Black Light Cover
Product Features
- Sold in 11 Inch Lengths
Disclaimer: Product information and images are provided by the manufacturer. While we strive for accuracy, LEER is not responsible for errors, omissions, or discrepancies in manufacturer-supplied-content.
Product Overview
RIGID RDS SR-Series PRO 11 Inch Black Light Cover is the curved end section used to complete protective coverage on compatible 20, 30, 40, and 50 inch RDS SR-Series PRO light bars. Its 11 inch length follows the curved end of the bar, while matching 10 inch cover sections span the remaining straight portions. This modular approach lets customers protect a large curved light bar without removing the lamp or changing its established mounting system.
Durable polycarbonate plastic adds a removable layer over the light face and helps reduce direct exposure to routine debris, dust, brush, and handling. The cover snaps on and off, supporting quick installation during storage, transport, trail preparation, or periods when the auxiliary bar is not being used. The solid black finish creates an opaque, coordinated appearance across the covered light.
Full bar coverage requires the 11 inch curved end section plus the correct number of 10 inch SR-Series PRO sections. A 20 inch RDS bar uses one 10 inch section and one 11 inch section. A 30 inch bar uses two 10 inch sections and one 11 inch section, a 40 inch bar uses three 10 inch sections and one 11 inch section, and a 50 inch bar uses four 10 inch sections and one 11 inch section.
The modular layout makes replacement simple because customers can service an individual cover section instead of replacing one oversized piece. It also allows sections to be removed for inspection and cleaning while the bar remains mounted. Proper series identification is essential because the curved RDS face and the narrower SR-Series PRO profile require the matching cover design.
The black cover is intended for use while the light is not operating, providing a clean covered look and practical lens protection. Customers can use it during hauling, storage, work staging, and off-road travel where the bar is not active. Keeping a spare end section can be useful because the curved piece is necessary to finish the protective run across the RDS bar.
Installation does not require changes to wiring, aiming, or primary bar brackets when the correct cover sections are used. Customers can assemble the needed sequence, check that each section is seated, and remove the covers when forward lighting is required. Whether customers are upgrading for modular bar protection, transport readiness, or a complete black covered appearance, the RIGID RDS SR-Series PRO 11 Inch Black Light Cover delivers the curved end coverage the system needs. Now Available at LEER!
Features & Specifications
Product Type: Modular curved light bar cover section
Brand: RIGID
Compatible Light: RDS SR-Series PRO 20, 30, 40, and 50 inch light bars
Section Length: 11 inches
Color: Black
Material: Durable polycarbonate plastic
Functionality:
- Completes coverage across the curved end of a compatible RDS SR-Series PRO bar.
- Pairs with 10 inch SR-Series PRO cover sections for full bar coverage.
- Helps reduce routine lens exposure to dust, debris, brush, and handling.
- Snaps on and off without changing light bar brackets or aim.
- Allows individual cover sections to be replaced as needed.
- Creates an opaque black covered appearance when the light is not operating.
- Supports modular coverage for 20, 30, 40, and 50 inch bar lengths.
Why Choose
This product is ideal for customers who want the correct curved end section for complete modular coverage of a compatible RDS SR-Series PRO light bar.
- Follows the curved RDS bar end where a straight 10 inch section cannot provide complete coverage.
- Works with matching modular sections instead of requiring one large cover.
- Allows damaged or missing sections to be replaced individually.
- Leaves the primary bar installation, wiring, and aim unchanged.
- Snaps on and off for efficient storage and trip preparation.
- Provides a clean black appearance across the covered lighting system.
- Supports several common RDS SR-Series PRO bar lengths with a defined section count.
What's Included
- One RIGID RDS SR-Series PRO 11 inch black curved cover section.
Note: Confirm included components before installation.
Installation Notes
- Confirm that the installed bar is a compatible RDS SR-Series PRO model and verify its overall length.
- Use one matching 11 inch curved section with one, two, three, or four 10 inch sections for 20, 30, 40, or 50 inch bars respectively.
- Clean the lens and section contact areas, then seat each cover section evenly across the bar.
- Remove the opaque cover sections before operating the auxiliary light bar.
Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.
Warranty Information
Warranty handling follows the coverage provided for the RIGID accessory and may require proof of purchase. Customers should retain purchase records and identify the exact 11 inch section when requesting support.
Warranty coverage typically excludes improper installation, misuse, modifications, tampering, impact damage outside applicable terms, or use that does not follow product instructions. Replace any section that is cracked, distorted, or unable to remain securely attached.