RIGID Industries SR-Q Series PRO Surface Mount Back-Up Kit

 

The RIGID Industries SR-Q Series PRO Surface Mount Back-Up Kit provides a complete two-light rear illumination system for customers who need better visibility while reversing, towing, loading, or working after dark. Its surface-mount design uses adjustable external brackets, avoiding the permanent panel cutout required by a flush installation. This approach works well on compatible bumpers, racks, utility bodies, trailer frames, fabricated tabs, and other sturdy rear mounting locations.

Each SR-Q Series PRO light produces 3,168 raw lumens through a Flood Diffused optic with a 102.1-degree horizontal and 87.4-degree vertical beam spread. The exceptionally broad pattern helps illuminate the nearby ground, hitch area, cargo, obstacles, tools, and surrounding work zone instead of sending a narrow beam far behind the vehicle. Two matching lights create balanced coverage across the rear and improve visibility during low-speed maneuvering.

The wide, low-profile SR-Q housing measures about 5 inches wide, 1.8 inches high, and 2.23 inches deep. This shape fits many locations where vertical space is limited, while the U-shape brackets allow installers to adjust the beam after the vehicle is loaded or the final mounting angle is established. Black covers protect the lens fronts when the system is not in use and give the rear installation a clean finished appearance.

The lights operate from 9-36V, draw 2.21A at 14V, and are rated at 31W each. The kit includes the light pair, mounting hardware, stainless steel U-shape brackets, black covers, and a harness and switch without a relay. These components provide the foundation for a coordinated system, while the installer remains responsible for correct wire sizing, grounding, circuit protection, switching, and any reverse-trigger integration.

Surface mounting keeps the lights accessible for adjustment, cleaning, service, and relocation without cutting a large recessed opening. It also requires careful placement so the pods and brackets do not interfere with tailgates, hitches, cargo, trailer components, sensors, exhaust outlets, or normal vehicle movement. A protected wiring route and secure bracket attachment help the system withstand vibration and regular use in work, towing, camping, and off-road environments.

The combination of high output, very wide coverage, and adjustable external mounting makes the kit useful for both everyday parking support and demanding rear utility tasks. Whether customers are upgrading for trailer alignment, nighttime cargo handling, campsite setup, jobsite visibility, or low-speed trail maneuvering, the RIGID Industries SR-Q Series PRO Surface Mount Back-Up Kit delivers broad, powerful rear illumination. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Surface-mount dual back-up light kit

Brand: RIGID Industries

Light Series: SR-Q Series PRO

Light Quantity: Two LED pods

Mounting Style: Surface mount with U-shape brackets

Beam Pattern: Flood Diffused

Light Output: 3,168 raw lumens per light

Power Draw: 31W and 2.21A at 14V per light

Voltage Range: 9-36V

Beam Angle: 102.1 degrees horizontal and 87.4 degrees vertical

Peak Beam Intensity: 1,338 candela

Dimensions: 5 inches wide, 1.8 inches high, and 2.23 inches deep per light

Weight: 1.476 pounds per light

Included Covers: Black light covers

Functionality:

• Adds two high-output rear-facing lights without requiring a recessed bumper or panel cutout
• Uses very wide Flood Diffused optics for close-range reversing and work-area coverage
• Helps reveal trailer couplers, cargo, tools, obstacles, and uneven terrain after dark
• Mounts to compatible bumpers, racks, utility bodies, trailers, and fabricated tabs
• Allows the beam to be adjusted through stainless steel U-shape brackets
• Provides balanced illumination across the rear through a matched light pair
• Supports towing, work, campsite, cargo, overland, and low-speed trail use
• Includes covers, harness, switch, brackets, and hardware for a coordinated kit

 

---

 

Why Choose

This product is ideal for customers who want powerful wide-angle rear lighting with adjustable surface-mounted installation.

• Surface mounting avoids the permanent large cutout required by a flush installation
• Two SR-Q lights create strong, balanced illumination across the rear zone
• Very wide beam angles improve nearby visibility for reversing and utility work
• The low-profile housing fits locations where vertical space is limited
• Adjustable brackets allow the beam aim to be tuned after installation
• Black covers protect the lens fronts and keep the system looking finished when not in use
• Included wiring and switching components support a coordinated two-light installation
• The kit handles everyday parking support as well as towing, work, camping, and trail travel

 

---

 

What's Included

• Two RIGID Industries SR-Q Series PRO Flood Diffused surface-mount lights
• Stainless steel U-shape brackets
• Mounting hardware
• Harness and switch without relay
• Black light covers
• Installation instructions

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Select a rigid mounting location with clearance for the pod, bracket, adjustment range, wiring, tailgate, hitch, sensors, and nearby equipment.
• Check the area behind every drilling point and protect the wiring from heat, abrasion, sharp edges, water collection, and moving parts.
• Use correctly sized wire, grounding, switching, and overcurrent protection for the two 31W lights and the selected control method.
• Aim the lights toward the rear ground and work zone, then confirm that the final beam does not create unsafe glare.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID Industries lists this lighting kit with a limited lifetime warranty for qualifying defects under the brand warranty terms in effect at the time of purchase.

Coverage may exclude improper installation, unsupported electrical connections, misuse, alterations, overloading, tampering, collision damage, impact damage outside warranty terms, normal wear, or non-compliant use. Proof of purchase may be required for a warranty claim.