RIGID Industries SR-Q Series PRO Flush Mount LED Light Pod Pair

 

The RIGID Industries SR-Q Series PRO Flush Mount LED Light Pod Pair provides a matched pair of low-profile SR-Q Series PRO lights for customers who need broad, diffused illumination from a recessed installation. The compact single-row housings fit locations where vertical space is limited, while the flush-mount design creates a clean finished profile in bumpers, panels, trailers, and custom utility bodies. Two lights allow wider, more balanced coverage than a single pod.

Flood Diffused optics spread light across a broad nearby area and soften the pattern for work, maneuvering, and reverse-area visibility. The beam is useful for trailer positioning, cargo handling, campsite setup, low-speed trail movement, and equipment checks where even coverage is more valuable than a narrow long-distance hotspot. Mounting the pair with appropriate separation can reduce shadows and improve visibility across the full working zone.

Each SR-Q PRO light in this configuration produces 3,168 raw lumens and uses approximately 31 watts, creating a combined raw output of 6,336 lumens for the pair. The lights operate across a 9V-36V input range, allowing use on many truck, SUV, powersports, trailer, and utility electrical systems. The circuit should be sized for the combined load and protected with appropriate fusing and switching.

The black housings use a durable powder-coated finish, high-grade aluminum construction, impact-resistant polycarbonate lenses, integrated thermal management, and pressure-equalizing vents. IP68 ingress protection supports use around dust, water, mud, and changing weather when the installation and electrical connections are completed correctly. Over-voltage, under-voltage, and reverse-polarity protection add safeguards for the light assemblies.

Flush mounting requires a prepared opening and a secure, flat structure capable of supporting both lights. The recessed profile can look integrated into a rear bumper, utility panel, trailer body, or custom enclosure while helping shield the housings from protruding beyond the surface. Careful measurement before cutting is critical because light clearance, fastener access, wiring space, and serviceability all need to be considered.

This pair is a practical choice for customers who want strong close-range coverage without the height of a larger cube light or the length of a full light bar. It supports reverse-area visibility, work lighting, loading, camp setup, and low-speed off-road use when aimed and wired for the application. Whether customers are upgrading for trailer positioning, cargo work, campsite lighting, or custom bumper integration, the RIGID Industries SR-Q Series PRO Flush Mount LED Light Pod Pair delivers broad diffused output from a compact recessed pair. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Flood Diffused auxiliary LED light pair

Brand: RIGID Industries

Series: SR-Q Series PRO

Vehicle Fitment: Universal truck, SUV, powersports, trailer, and utility lighting

Light Quantity: Pair

Housing Format: Low-profile single-row SR-Q pod

Housing Color: Black

Mount Type: Flush Mount

Beam Pattern: Flood Diffused

Voltage Range: 9V-36V DC

Raw Lumens: 3,168 per light and 6,336 combined

Wattage: Approximately 31 watts per light

Current Draw: Approximately 2.21 amps per light

Ingress Protection: IP68

Lens: Impact-resistant polycarbonate

Functionality:

• Provides broad diffused light for reverse areas, cargo zones, campsites, and work areas
• Uses a matched pair to create wider and more balanced illumination
• Fits prepared bumpers, panels, trailers, and utility bodies with a recessed profile
• Supports low-speed maneuvering and equipment positioning without relying on a narrow distance beam
• Operates across 9V-36V systems with properly sized circuit protection
• Uses durable housings, protected electronics, and pressure-equalizing vents for outdoor use
• Keeps vertical height compact where mounting space is limited

 

---

 

Why Choose

This product is ideal for customers who want strong broad-area output from a compact recessed pair with soft Flood Diffused coverage.

• Combined 6,336 raw lumens deliver useful close-range illumination across a wide work area
• Flood Diffused optics soften the beam for reversing, loading, and low-speed tasks
• Pair configuration helps reduce shadows and improve coverage from side to side
• Flush mounting creates a clean profile in bumpers, panels, and custom equipment bodies
• Low vertical height fits locations that may not accept taller cube-style lights
• IP68 protection and impact-resistant lenses support demanding outdoor environments
• Wide voltage compatibility suits many properly protected vehicle, trailer, and equipment circuits

 

---

 

What's Included

• Two RIGID Industries SR-Q Series PRO Flood Diffused flush mount light pods
• Flush-mount trim and installation hardware supplied for the pair
• Wiring harness and switching components when included with the selected package

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Measure both openings and confirm rear clearance, panel strength, fastener access, and service space before cutting
• Size the fuse, relay, wire, and switch for the combined electrical load of the pair
• Aim the diffused beams to cover the intended work or reverse area while limiting glare toward other road or trail users
• Seal wiring connections and protect the harness from water intrusion, heat, abrasion, sharp edges, and moving parts

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID LED lighting is backed by a limited lifetime warranty against defects in materials and workmanship, subject to the brand's published terms, exclusions, and claim procedures. Proof of purchase may be required, and warranty service may require review of the product and installation.

Coverage typically excludes improper installation, misuse, unauthorized modification, electrical faults outside the light, overvoltage, tampering, neglect, collision or impact damage, and use that falls outside the product's intended application. Mounts, accessories, finishes, and related components may carry different coverage periods, so customers should retain purchase records and review the applicable warranty terms before beginning a claim.