RIGID Industries SR-Q Series PRO Flush Mount Back-Up Kit

 

The RIGID Industries SR-Q Series PRO Flush Mount Back-Up Kit gives compatible vehicles and trailers a clean recessed rear-lighting system built around two broad-beam SR-Q Series PRO lights. It is intended for customers who need stronger visibility while reversing, lining up a trailer, loading equipment, or working around the rear of a vehicle after dark. The flush format positions the light bodies within a compatible bumper or panel, reducing exterior projection and creating an integrated finished appearance.

Each SR-Q Series PRO light produces 3,168 raw lumens through a Flood Diffused optic with an exceptionally wide 102.1-degree horizontal and 87.4-degree vertical beam spread. This pattern illuminates the nearby ground, hitch area, obstacles, cargo, tools, and surrounding work zone instead of focusing output into a narrow long-distance beam. A matched pair provides strong, balanced coverage across the rear for low-speed maneuvering and utility tasks.

The SR-Q format uses a wide, low-profile housing that works well where vertical space is limited but customers want more output and beam width than a smaller mini pod. The flush-mount flange measures about 6.3 inches wide and the assembly is about 2.1 inches deep, so careful measurement is required before cutting. Once installed, the lights sit close to the surface and maintain a tidy appearance on compatible bumpers, utility bodies, trailers, and fabricated panels.

The lights operate from 9-36V, draw 2.21A at 14V, and are rated at 31W each. RIGID includes the light pair, mounting hardware, and a harness and switch without a relay, providing the principal components for a coordinated rear-lighting system. The final electrical design must still account for correct wire sizing, grounding, overcurrent protection, switching, and any connection to a reverse-trigger circuit.

Flush mounting can reduce snag points around cargo, brush, equipment, and busy work areas, but it also requires a permanent opening and enough space behind the panel. Installers should confirm structural clearance, sensor locations, hitch components, wiring harnesses, and service access before cutting. Thoughtful placement and aim allow the kit to support towing, campsite maneuvering, jobsite tasks, cargo handling, and low-speed off-road travel.

The combination of broad beam coverage, substantial output, and a recessed two-light layout makes this kit a practical choice for customers who value both performance and a clean installation. Whether customers are upgrading for trailer positioning, rear work lighting, dark-driveway reversing, nighttime loading, or an integrated custom build, the RIGID Industries SR-Q Series PRO Flush Mount Back-Up Kit delivers powerful close-range illumination. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Flush-mount dual back-up light kit

Brand: RIGID Industries

Light Series: SR-Q Series PRO

Light Quantity: Two LED pods

Mounting Style: Flush mount

Beam Pattern: Flood Diffused

Light Output: 3,168 raw lumens per light

Power Draw: 31W and 2.21A at 14V per light

Voltage Range: 9-36V

Beam Angle: 102.1 degrees horizontal and 87.4 degrees vertical

Peak Beam Intensity: 1,338 candela

Dimensions: 6.3 inches wide and 2.1 inches deep per flush-mount light

Weight: 1.72 pounds per light

Wiring: Harness and switch without relay

Functionality:

• Adds a recessed pair of high-output rear-facing lights for reversing and utility work
• Creates very broad close-range coverage through Flood Diffused optics
• Helps illuminate trailer connections, obstacles, cargo, tools, and uneven ground
• Provides balanced output across the rear through two matching SR-Q Series PRO lights
• Reduces exterior projection for a cleaner appearance and fewer exposed snag points
• Fits compatible bumpers, utility bodies, trailers, and custom fabricated panels
• Supports towing, loading, work, camping, overlanding, and low-speed trail maneuvering
• Operates across 9-36V when connected through a correctly designed auxiliary circuit

 

---

 

Why Choose

This product is ideal for customers who want strong wide-angle rear illumination in a clean, recessed two-light installation.

• High-output SR-Q lights provide substantial illumination for dark rear work zones
• Extremely wide beam angles spread light across the ground and surroundings behind the vehicle
• Flush mounting integrates the lights into the bumper or panel instead of leaving exposed brackets
• The low-profile housing works well where vertical mounting space is limited
• Two lights provide more even coverage across the rear than a single offset pod
• Included harness and switch components support a coordinated installation plan
• The kit serves towing, work, cargo, campsite, overland, and off-road use cases
• Reduced exterior projection can help protect the installation around brush, cargo, and equipment

 

---

 

What's Included

• Two RIGID Industries SR-Q Series PRO Flood Diffused flush-mount lights
• Flush-mount hardware
• Harness and switch without relay
• Installation instructions

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Measure the flange, light body, cutout, and rear clearance before cutting, and inspect both sides of the mounting surface for hidden components.
• Keep the installation clear of structural supports, sensors, hitches, exhaust parts, tanks, factory wiring, and moving components.
• Use correctly sized wire, grounding, switching, and overcurrent protection for the two 31W lights and the selected control method.
• Seal and protect the cut edges as appropriate, then aim the lights toward the rear ground zone to limit glare.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID Industries lists this lighting kit with a limited lifetime warranty for qualifying defects under the brand warranty terms in effect at the time of purchase.

Coverage may exclude improper installation, unsupported electrical connections, misuse, alterations, overloading, tampering, collision damage, impact damage outside warranty terms, normal wear, or non-compliant use. Proof of purchase may be required for a warranty claim.