RIGID Industries SR-M Series PRO Surface Mount Back-Up Kit

 

The RIGID Industries SR-M Series PRO Surface Mount Back-Up Kit adds a balanced pair of compact rear-facing lights without requiring a recessed cutout in the bumper or body panel. It is designed for customers who need more useful visibility while reversing, lining up a trailer, working around cargo, or maneuvering through dark campsites and job sites. The external bracketed format gives installers flexibility to place the lights on suitable bumpers, racks, trailer structures, utility bodies, and fabricated mounting tabs.

Each SR-M Series PRO light produces 1,584 raw lumens through a Flood Diffused optic built for wide close-range coverage. The 70.5-degree horizontal and 66.2-degree vertical spread helps illuminate the area directly behind the vehicle, including hitch components, obstacles, tools, cargo, and uneven terrain. Using two matching lights provides more even rear illumination than relying on one offset lamp or weak factory backup bulbs alone.

The compact pod measures about 3 inches wide and 2.4 inches deep, allowing the system to fit where larger lights could interfere with bumper corners, tailgates, equipment, or trailer hardware. Stainless steel U-shape brackets provide adjustment for beam aim and make the installation easier to service or reposition than a permanent recessed mount. Black light covers protect the lenses when the lights are not being used and maintain a clean appearance on the rear of the vehicle.

The lights operate from 9-36V, draw 1.14A at 14V, and are rated at 16W each. The kit includes a harness and switch without a relay, Deutsch connector components, mounting hardware, and the two-light set, providing the core pieces for a coordinated auxiliary lighting installation. Correct circuit protection, routing, grounding, and integration with a reverse or manual switch function remain essential for dependable operation.

The SR-M Series PRO format is suited to daily utility as well as towing, work, camping, overlanding, and trail use. Surface mounting avoids the larger panel cutout required by a flush assembly, which can be useful on vehicles or trailers where the mounting surface should remain intact. The adjustable brackets also allow customers to fine-tune the beam toward the rear ground zone after the vehicle is loaded and the final ride height is established.

A secure mounting surface and protected wiring path are important because rear lights are exposed to weather, debris, vibration, and nearby equipment. Whether customers are upgrading for trailer alignment, dark-driveway reversing, campsite setup, cargo handling, or rear work illumination, the RIGID Industries SR-M Series PRO Surface Mount Back-Up Kit delivers broad light from compact adjustable pods. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Surface-mount dual back-up light kit

Brand: RIGID Industries

Light Series: SR-M Series PRO

Light Quantity: Two LED pods

Mounting Style: Surface mount with U-shape brackets

Beam Pattern: Flood Diffused

Light Output: 1,584 raw lumens per light

Power Draw: 16W and 1.14A at 14V per light

Voltage Range: 9-36V

Beam Angle: 70.5 degrees horizontal and 66.2 degrees vertical

Peak Beam Intensity: 1,830 candela

Dimensions: 3 inches wide and 2.4 inches deep per light

Weight: 0.588 pounds per light

Included Covers: Black light covers

Functionality:

• Adds two adjustable rear-facing lights without cutting a recessed opening in the mounting surface
• Spreads light across the nearby rear zone with Flood Diffused optics
• Helps reveal trailer couplers, obstacles, cargo, tools, and uneven ground after dark
• Fits compatible bumpers, racks, trailers, utility bodies, and custom mounting tabs
• Allows beam aim to be adjusted through stainless steel U-shape brackets
• Supports towing, work, campsite, cargo, overland, and low-speed off-road use
• Operates across a broad 9-36V range when connected to a properly designed circuit
• Includes covers, wiring, switching, connector, and mounting components for a coordinated kit

 

---

 

Why Choose

This product is ideal for customers who want compact adjustable rear lighting without cutting a flush-mount opening.

• Surface mounting works on suitable external locations where a recessed installation is not practical
• Two lights provide balanced illumination across the rear work and maneuvering zone
• Flood Diffused optics emphasize nearby coverage for reversing and utility tasks
• Compact pod dimensions preserve clearance around bumpers, tailgates, racks, and trailer hardware
• Adjustable U-shape brackets allow the beam aim to be refined after installation
• Black covers protect the lenses and maintain a finished appearance when the lights are off
• Included harness and switch components simplify planning for a matched two-light system
• The kit serves daily parking needs as well as towing, camping, work, and trail travel

 

---

 

What's Included

• Two RIGID Industries SR-M Series PRO Flood Diffused surface-mount lights
• Stainless steel U-shape brackets
• Mounting hardware
• Harness and switch without relay
• Deutsch connector components
• Black light covers
• Installation instructions

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Choose a rigid mounting surface with enough room for the pod, bracket, adjustment range, wiring, and nearby moving components.
• Check clearance from the tailgate, hitch, exhaust, sensors, camera views, cargo, and trailer equipment before drilling or final tightening.
• Use correctly sized wiring, switching, grounding, and overcurrent protection for the selected reverse or auxiliary circuit.
• Aim both lights toward the rear ground area and verify that the final beam does not create unsafe glare.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID Industries lists this lighting kit with a limited lifetime warranty for qualifying defects under the brand warranty terms in effect at the time of purchase.

Coverage may exclude improper installation, unsupported electrical connections, misuse, alterations, overloading, tampering, collision damage, impact damage outside warranty terms, normal wear, or non-compliant use. Proof of purchase may be required for a warranty claim.