RIGID Industries SR-M Series PRO Flush Mount Back-Up Kit

 

The RIGID Industries SR-M Series PRO Flush Mount Back-Up Kit creates a clean recessed rear-lighting upgrade for customers who need better visibility while reversing, positioning a trailer, loading gear, or working after dark. Two compact SR-M Series PRO lights sit within a compatible bumper or panel instead of projecting outward on exposed brackets. The flush layout gives trucks, SUVs, trailers, utility bodies, and custom builds a tidy finished appearance while adding useful close-range illumination.

Each SR-M Series PRO light produces 1,584 raw lumens through a Flood Diffused optic designed to spread light across the nearby rear zone. The 70.5-degree horizontal and 66.2-degree vertical beam angles help reveal obstacles, hitch components, tools, cargo, and uneven ground without relying on a narrow distance-focused pattern. A matched pair creates more even coverage across the rear than a single light mounted to one side.

The compact SR-M format is well suited to tight mounting areas where a larger pod would consume valuable bumper or panel space. Flush mounting reduces exterior projection and helps protect the installed lights from snagging around cargo, brush, equipment, and work areas. Customers gain a lower-profile solution that looks integrated into the mounting surface while retaining the performance and service access expected from a dedicated auxiliary light kit.

The lights operate from 9-36V, draw 1.14A at 14V, and are rated at 16W each. RIGID pairs the lights with a harness and switch without a relay, mounting hardware, and Deutsch connector components for a planned two-light installation. The electrical system, switching method, and connection to a reverse or auxiliary circuit still need to be selected and protected correctly for the vehicle or trailer.

The SR-M Series PRO platform combines compact dimensions with a rugged housing designed for demanding vehicle environments. The flush-mount assembly measures about 4.5 inches wide and 2.2 inches deep, giving installers a clear basis for checking cutout and rear-clearance requirements before work begins. Careful placement allows the lights to support daily parking, trailer alignment, campsite maneuvering, jobsite tasks, and low-speed off-road travel without adding a bulky external structure.

Because this kit requires cutting into the mounting surface, installation planning is as important as beam selection. Whether customers are upgrading for safer reversing, trailer positioning, rear work lighting, nighttime cargo access, or a more integrated custom build, the RIGID Industries SR-M Series PRO Flush Mount Back-Up Kit delivers balanced close-range illumination in a compact recessed format. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Flush-mount dual back-up light kit

Brand: RIGID Industries

Light Series: SR-M Series PRO

Light Quantity: Two LED pods

Mounting Style: Flush mount

Beam Pattern: Flood Diffused

Light Output: 1,584 raw lumens per light

Power Draw: 16W and 1.14A at 14V per light

Voltage Range: 9-36V

Beam Angle: 70.5 degrees horizontal and 66.2 degrees vertical

Peak Beam Intensity: 1,830 candela

Dimensions: 4.5 inches wide and 2.2 inches deep per flush-mount light

Weight: 0.588 pounds per light

Connector Type: Deutsch connector components

Functionality:

• Adds a recessed pair of rear-facing lights for improved visibility while backing and maneuvering
• Uses Flood Diffused optics to illuminate close-range obstacles, hitch areas, cargo, and uneven ground
• Creates balanced rear coverage through two matching SR-M Series PRO lights
• Reduces exterior projection compared with a bracketed surface-mount installation
• Fits compatible bumpers, utility panels, trailers, and custom rear lighting locations
• Supports trailer alignment, campsite setup, cargo loading, work tasks, and low-speed trail movement
• Operates across a broad 9-36V range for properly designed vehicle and accessory circuits
• Includes harness, switch, connector, and mounting components for a coordinated installation

 

---

 

Why Choose

This product is ideal for customers who want compact rear illumination with a clean recessed appearance and broad close-range coverage.

• Flush mounting creates a lower-profile look that integrates with the bumper or panel
• Two lights distribute illumination more evenly across the rear work zone
• Flood Diffused optics emphasize nearby visibility rather than a narrow long-distance beam
• Compact dimensions suit mounting locations where larger pods would be difficult to package
• Included harness and switch components support a coordinated two-light wiring plan
• Deutsch connector components provide a serviceable connection point when installed correctly
• The kit supports towing, work, cargo, camping, overlanding, and off-road maneuvering
• Reduced exterior projection can limit exposure to brush, cargo, and nearby equipment

 

---

 

What's Included

• Two RIGID Industries SR-M Series PRO Flood Diffused flush-mount lights
• Flush-mount hardware
• Harness and switch without relay
• Deutsch connector components
• Installation instructions

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Measure the light body, flange, cutout, and wiring clearance before cutting the bumper or panel; inspect both sides of the mounting surface first.
• Keep the installation clear of structural members, sensors, hitches, exhaust components, tanks, factory harnesses, and moving parts.
• Use correctly sized wiring, switching, grounding, and overcurrent protection for the selected reverse or auxiliary circuit.
• Seal and finish the cut edges as appropriate, then aim both lights toward the rear ground area to reduce glare.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID Industries lists this lighting kit with a limited lifetime warranty for qualifying defects under the brand warranty terms in effect at the time of purchase.

Coverage may exclude improper installation, unsupported electrical connections, misuse, alterations, overloading, tampering, collision damage, impact damage outside warranty terms, normal wear, or non-compliant use. Proof of purchase may be required for a warranty claim.