RIGID Industries SR-L Series Pod
Disclaimer: Product information and images are provided by the manufacturer. While we strive for accuracy, LEER is not responsible for errors, omissions, or discrepancies in manufacturer-supplied-content.
Product Details
The RIGID Industries SR-L Series Off-Road Spreader Pod is built for customers who need wide, close-range illumination around trucks, SUVs, powersports machines, trailers, campsites, and work areas. Its low-profile SR-L shape spreads light across the nearby scene rather than sending a narrow beam far ahead. The surface mount arrangement supports flexible placement on brackets, racks, bumpers, trailers, and other flat mounting points, while the paired-light format helps create balanced coverage on both sides of a vehicle or equipment setup.
A 120-degree horizontal spread and broad vertical coverage make these lights useful for tasks that happen beside or behind the vehicle. The beam can illuminate recovery gear, cargo, campsite walkways, trailer connections, pit equipment, and the ground near a work zone. Even nearby coverage also helps reduce the need to point a concentrated driving beam toward people, reflective materials, or neighboring campsites.
Each light uses a high-grade aluminum alloy housing and heat sink, an impact-resistant polycarbonate lens, integrated thermal management, and a pressure-equalizing vent. The compact 4.5 by 1.5-inch format is easy to package where a larger bar would be intrusive. A 9V-36V operating range supports a wide variety of vehicle and equipment electrical systems when the circuit is properly fused, switched, and wired.
The integrated halo adds a separate visual element around the main spreader output, with a white halo accent. The accent can help the lights coordinate with marker lighting, camp lighting, or the broader styling of a custom build. Because halo use and main-light use can serve different purposes, wiring should be planned so the desired functions are easy to control without compromising the primary illumination circuit.
Rated performance includes 1,452 raw lumens, 14 watts, and approximately 1 amp of current draw at 14 volts for the spreader light configuration. Those figures make the SR-L a compact utility light rather than a long-range forward-driving lamp. The pair is most effective when mounted and aimed to cover the immediate work area, with enough separation to reduce deep shadows around the vehicle.
Customers can use the SR-L pair for camp setup, trail repairs, loading, reverse-area support, trailer work, cargo access, or low-speed off-road activity. The surface mount format keeps the installation approach clear, while the wide beam and halo accent combine practical illumination with a distinctive finished appearance. Whether customers are upgrading for campsite lighting, recovery work, cargo visibility, or off-road utility, the RIGID Industries SR-L Series Off-Road Spreader Pod delivers broad nearby coverage in a compact paired package. Now Available at LEER!
Features & Specifications
Product Type: Auxiliary LED spreader and scene light pair
Brand: RIGID Industries
Series: SR-L Series
Vehicle Fitment: Universal off-road, trailer, and utility lighting
Light Quantity: Pair
Mount Type: Surface Mount
Beam Pattern: 120-degree flood and scene pattern
Halo Color: White
Voltage Range: 9V-36V DC
Housing Width: Approximately 4.28 inches
Housing Height: Approximately 1.97 inches
Housing Depth: Approximately 1.875 inches
Wiring: Open leads
Bracket Material: Stainless steel U-shape brackets
Functionality:
- Provides broad scene lighting around campsites, recovery areas, trailers, and work zones
- Supports balanced illumination through a matched left-right light pair
- Adds a clean white halo accent around the main spreader optics
- Surface-mount brackets allow the lights to be positioned and aimed for the installation
- Compact housings fit locations where a larger light bar would interfere with other equipment
- Open leads support custom integration into a properly fused and switched circuit
- Wide input voltage allows use on many vehicle, powersports, trailer, and utility systems
Why Choose
This product is ideal for customers who want a compact surface-mounted scene-light pair with broad coverage and a clean white halo accent.
- Wide beam helps illuminate the area around the vehicle rather than only the path ahead
- White halo styling coordinates with neutral marker lights and understated custom builds
- Pair format supports even coverage across cargo, campsite, recovery, or work areas
- Adjustable U-shape brackets make it easier to fine-tune aim after mounting
- Compact dimensions provide flexible placement on racks, bumpers, trailers, and equipment
- Open wiring leads support custom switching and integration by a qualified installer
- 9V-36V compatibility suits many properly protected vehicle and equipment circuits
What's Included
- Two RIGID Industries SR-L Series surface mount spreader pods with white halo backlighting
- Stainless steel U-shape mounting brackets
- Mounting hardware supplied for the light pair
- Open wiring leads
Note: Confirm included components before installation.
Installation Notes
- Select structurally sound mounting points with enough clearance for bracket adjustment, wiring, and lens protection
- Use suitable fusing, relays, switches, wire gauge, and weather-resistant connections for the combined light load
- Confirm the main spreader and white halo circuits operate as intended before securing the harness
- Aim both lights for useful close-range coverage without directing glare toward drivers, passengers, or nearby traffic
Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.
Warranty Information
RIGID LED lighting is backed by a limited lifetime warranty against defects in materials and workmanship, subject to the brand's published terms, exclusions, and claim procedures. Proof of purchase may be required, and warranty service may require review of the product and installation.
Coverage typically excludes improper installation, misuse, unauthorized modification, electrical faults outside the light, overvoltage, tampering, neglect, collision or impact damage, and use that falls outside the product's intended application. Mounts, accessories, finishes, and related components may carry different coverage periods, so customers should retain purchase records and review the applicable warranty terms before beginning a claim.