Rigid Ignite LED Light Flush Mount

 

RIGID Ignite Flush Mount LED Light positions useful auxiliary illumination into a recessed, ultra-compact housing for customers who value clean integration. Instead of sitting on an exposed external bracket, the light installs through a prepared opening so most of the body remains behind the mounting surface. This approach works especially well on bumpers, rear panels, grilles, service bodies, trailers, and custom enclosures where a tidy finished appearance matters.

The compact Ignite platform produces up to 1,000 raw lumens while occupying only a small portion of the panel. That output can support reverse visibility, close-range utility work, campsite setup, loading areas, accent placement, and targeted supplemental lighting. The flush arrangement also reduces protrusion, helping protect the fixture from cargo, brush, and accidental contact compared with a more exposed pod.

Three optical choices let customers match the recessed light to its intended zone. Spot sends a concentrated pattern farther from the panel, Flood spreads the output across a wider nearby area, and Diffused softens the beam for scene and work applications. Selecting the correct optic is important because a flush light cannot be aimed as freely as a bracket-mounted pod once the panel opening is complete.

The housing is suited to DC vehicle systems and common exterior environments when installed correctly. Aluminum construction helps manage heat, sealed electronics resist water and dust, and the low 12-watt draw on common versions keeps electrical demand manageable. Reliable service still depends on a properly fused circuit, weather-resistant connections, protected wiring, and enough open space behind the panel for the body and leads.

A flush installation requires careful measurement before cutting. Installers should verify panel strength, rear clearance, fastener access, wire routing, and the final beam direction with the vehicle at normal ride height. A thoughtful layout produces an integrated result that looks intentional and targets the area customers actually need to see.

Whether customers are upgrading for reverse visibility, trailer lighting, work-area illumination, compact scene lighting, or a discreet custom build, the RIGID Ignite Flush Mount LED Light delivers practical output with a clean recessed appearance. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Ultra-compact flush-mount LED auxiliary light

Brand: RIGID Industries

Series: Ignite

Mounting Style: Recessed flush mount

Raw Lumens: Up to 1,000, depending on configuration

Beam Patterns: Spot, Flood, and Diffused

Typical Power Draw: 12 watts

Typical Current Draw: 0.85 amps at 14 volts

Operating Voltage: 9-24 volts DC

Approximate Dimensions: 1.8 inches high x 1.4 inches wide x 2.1 inches deep

Protection: IP68 water and dust resistance

Typical Applications: Bumpers, rear panels, grilles, trailers, service bodies, and custom enclosures

Functionality:

• Creates a recessed lighting installation with minimal external protrusion.
• Supports compact reverse and rear-area visibility.
• Provides focused output with Spot optics.
• Spreads nearby illumination with Flood optics.
• Creates soft work and scene coverage with Diffused optics.
• Fits panels and enclosures that cannot accept a larger external pod.
• Helps protect the light from brush, cargo, and accidental contact.
• Supports trailers, service vehicles, powersports machines, and custom fabrication.

 

---

 

Available Options

The RIGID Ignite Flush Mount is available with three optic choices:

• Spot Beam - directs more light away from the mounting panel for focused auxiliary visibility.
• Flood Beam - increases nearby width for reverse, utility, and low-speed applications.
• Diffused Beam - softens the output for work zones, loading areas, campsites, and scene lighting.

Choose Spot for focused reach, Flood for broader nearby visibility, or Diffused for soft close-range scene illumination.

 

---

 

Why Choose

This product is ideal for customers who want an ultra-compact light that sits cleanly within a bumper, panel, grille, or custom enclosure.

• Flush mounting preserves a clean exterior profile and reduces exposed hardware.
• The small housing fits locations that cannot accept a conventional pod or light bar.
• Up to 1,000 raw lumens provides useful targeted output for compact applications.
• Three beam choices support focused, broad, or softly diffused lighting zones.
• Low power demand simplifies integration into properly designed accessory circuits.
• Sealed construction supports exposure to weather, dust, and utility use.
• Recessed placement can help shield the light from brush, cargo, and impacts.
• The format works well for reverse, trailer, work, scene, and custom lighting projects.

 

---

 

What's Included

• RIGID Ignite flush-mount light pod or pod pair, depending on selected configuration
• Flush-mount hardware
• Cutout guidance or installation template when supplied
• Electrical leads
• Product documentation

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Verify panel strength, rear clearance, wiring access, and final beam direction before cutting the mounting opening.
• Seal exposed panel edges and electrical connections against corrosion and moisture after installation.
• Use a fused, properly switched circuit and protect wiring from heat, abrasion, sharp edges, and moving parts.
• Test the selected beam at normal vehicle height before finalizing the installation whenever possible.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID Ignite lighting products are generally covered by a limited lifetime warranty against qualifying defects in materials and workmanship under the applicable warranty terms.

Coverage typically excludes panel damage, improper installation, unsuitable wiring, misuse, unauthorized modification, tampering, and impact damage outside warranty terms. Proof of purchase may be required for warranty service.