RIGID E-Series, RDS, and Radiance 10-50 Inch Light Cover

 

RIGID E-Series, RDS, and Radiance 10-50 Inch Light Cover gives compatible straight and curved LED light bars a removable protective layer for storage, transport, trail use, and periods when the lighting system is not needed. The cover is intended for customers who already rely on an E-Series, RDS, or Radiance bar and want a clean accessory that follows the light face instead of changing the primary installation. Its broad 10 to 50 inch compatibility supports many common bar lengths used on trucks, SUVs, off-road vehicles, and work equipment.

Durable polycarbonate construction helps protect the exposed lens area from routine debris, dust, grime, and handling contact. The cover installs and removes without requiring customers to relocate the bar or disturb its main brackets. That service-friendly approach is valuable on vehicles that frequently move between open-trail lighting needs and covered-light conditions during transport, storage, or daytime use.

Black and Yellow options give customers two distinct ways to finish the light when it is covered. Black provides an opaque, low-profile appearance that blends easily with dark housings and common vehicle trim. Yellow adds a bright, high-contrast visual cue while retaining the same basic protective role and compatibility requirements.

The correct cover must match the installed light series and bar length, especially where straight and curved housings use different face shapes. Proper matching helps the cover seat securely across the lens area and maintain an even finished appearance. Customers should verify the exact E-Series, RDS, or Radiance configuration before installation rather than relying on bar length alone.

A removable cover can be used as part of regular light care by limiting direct exposure while the vehicle is parked, being hauled, or traveling through environments where the lamps are not active. It also provides a practical replacement path when an existing cover becomes lost, scratched, or worn. Carrying a spare can be useful for remote trips where maintaining covered auxiliary lighting matters.

The cover keeps the lighting system easy to inspect because it can be removed for lens cleaning, hardware checks, and visual review of the housing. After service, it returns the bar to a clean covered condition without changing aim or bracket placement. Whether customers are upgrading for bar protection, off-road travel, or a more finished covered appearance, the RIGID E-Series, RDS, and Radiance 10-50 Inch Light Cover delivers flexible coverage and easy handling. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Removable LED light bar cover

Brand: RIGID

Compatible Series: E-Series, RDS, and Radiance LED light bars

Compatible Lengths: 10 to 50 inch light bars

Material: Durable polycarbonate plastic

Available Colors: Black and Yellow

Functionality:

• Covers the light face during storage, transport, and periods when the bar is not being used.
• Helps limit routine contact from dirt, loose debris, brush, and handling.
• Removes for lighting use without changing the bar brackets or aim.
• Supports straight and curved light bar applications when the correct cover is selected.
• Offers an opaque Black choice and a high-contrast Yellow choice.
• Provides a replacement option for a lost, scratched, or worn compatible cover.
• Makes it practical to keep an extra cover with trail or work support equipment.

 

---

 

Available Options

The RIGID E-Series, RDS, and Radiance 10-50 Inch Light Cover is available in multiple color configurations:

• Black - Creates an opaque, understated covered appearance that pairs naturally with dark light housings and vehicle trim.
• Yellow - Creates a bright, high-contrast covered appearance while preserving the protective polycarbonate design.

Choose Black for a low-profile opaque finish, or choose Yellow for a brighter high-contrast covered look.

 

---

 

Why Choose

This product is ideal for customers who want removable protection across compatible 10 to 50 inch RIGID light bars without disturbing the main installation.

• Supports several established RIGID light bar series and a wide range of common bar lengths.
• Adds protective coverage while leaving primary brackets and aiming adjustments in place.
• Allows fast transitions between covered storage and active lighting use.
• Helps keep the lens area cleaner between trips and work cycles.
• Offers two straightforward appearance choices for different vehicle styles.
• Works as a replacement or spare for customers maintaining an existing light bar system.
• Provides a purpose-shaped alternative to improvised covers or loose protective wraps.

 

---

 

What's Included

• One compatible RIGID light bar cover in the selected color and size.
• Product packaging for the selected cover.

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Verify the exact light series, bar length, and straight or curved housing shape before ordering.
• Clean the lens and cover contact areas before installation to reduce trapped grit.
• Seat the cover evenly across the light face and check that all contact points are secure.
• Remove an opaque cover before operating the auxiliary light.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Warranty handling follows the coverage provided for the selected RIGID accessory and may require proof of purchase. Customers should retain the receipt and identifying information for the exact cover configuration.

Warranty coverage typically excludes improper installation, misuse, modifications, tampering, impact damage outside applicable terms, or use that does not follow product instructions. Replace the cover if damage prevents a secure, even fit over the light face.