Rigid D-Series SAE Fog Lights

 

The Rigid D-Series SAE Fog Lights deliver controlled poor-weather illumination from a compact 3-inch by 3-inch pod. Their small footprint works well in factory fog openings, aftermarket bumpers, grille guards, and custom brackets where a larger round lamp or light bar would be difficult to package. Customers gain a rugged lighting upgrade without overwhelming the front end with oversized equipment.

The SAE J583 fog optic is designed to spread light low and wide across the immediate driving area. This pattern helps reveal lane edges, shoulders, road texture, and nearby hazards in fog, rain, snow, dust, and other low-contrast conditions. When mounted and aimed correctly, the controlled cutoff also limits unnecessary upward glare compared with an unfocused auxiliary beam.

Higher-output D-Series PRO configurations produce up to approximately 3,445 raw lumens per light from the compact housing. The selective-yellow 40W version reaches that output while operating from 9V to 36V DC. This balance of strong output and small size makes the D-Series practical for work trucks, daily-driven SUVs, trail rigs, and specialty vehicles with limited mounting space.

White, selective yellow, and dual-color versions let customers match the light to their most common conditions. White output provides a crisp neutral appearance for clear-night travel, while selective yellow can improve perceived contrast in fog, rain, dust, and snow. Dual-color lights combine both choices in one housing, allowing the driver to change output without replacing the pod.

A high-grade aluminum alloy housing protects the electronics and acts as an oversized heat sink. The impact-resistant polycarbonate lens shields the optics from gravel, branches, road spray, and trail debris, while IP68-rated sealing, a pressure-equalizing vent, and integrated thermal management support operation through water, dust, and temperature changes. Reverse-polarity, over-voltage, and under-voltage protection on supported versions add electrical durability.

These lights can be installed as a universal pair or incorporated into vehicle-specific replacement kits. Customers should select the correct color configuration, verify bracket and harness needs, and aim the fog pattern after mounting so the light remains useful and controlled. Whether customers are upgrading factory fog lights, improving poor-weather visibility, building a compact bumper system, or adding adaptable auxiliary lighting, Rigid D-Series SAE Fog Lights deliver strong performance in a small rugged package. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Compact SAE fog LED pod

Brand: RIGID Industries

Series: D-Series PRO

Light Size: Approximately 3 in x 3 in

Beam Pattern: SAE J583 fog

Output Colors: White, selective yellow, or white and yellow dual color, depending on configuration

Raw Lumens: Up to approximately 3,445 per light on higher-output configurations

Power: Up to 40W per light on the selective-yellow high-output configuration

Input Voltage: 9V to 36V DC

Housing: High-grade aluminum alloy with integrated heat sink

Lens: Impact-resistant polycarbonate

Ingress Protection: IP68

Mounting Style: Surface mount or application-specific fog light bracket

Functionality:

• Creates a low, wide beam for the foreground, shoulders, lane edges, and nearby hazards
• Improves visibility in fog, dust, rain, snow, and other reduced-contrast conditions
• Fits tight bumper and bracket locations with a compact 3-inch square housing
• Offers white, selective yellow, and dual-color choices for changing conditions
• Produces strong output without requiring a large light bar or round lamp
• Resists water and dust exposure with IP68-rated sealing
• Manages heat and pressure to support reliable long-term LED operation
• Integrates into universal mounts or vehicle-specific factory fog replacement kits

 

---

 

Available Options

The Rigid D-Series SAE Fog Lights are available in multiple output configurations:

• White Output - Provides a crisp neutral-white beam for customers who want clear nighttime visibility and a modern LED appearance.
• Selective Yellow Output - Uses a yellow fog beam to support contrast in rain, snow, dust, fog, and other poor-weather conditions.
• White and Selective Yellow Dual Color - Combines both outputs in one pod so customers can adapt the light color as conditions change.
• Universal Pair or Vehicle-Specific Kit - Supports custom mounting or complete factory-location upgrades depending on the selected configuration.

Choose white for crisp general visibility, choose selective yellow for poor-weather contrast, or choose dual color for an adaptable two-color setup.

 

---

 

Why Choose

This product is ideal for customers who want compact SAE fog lighting with high output, rugged construction, and selectable color options.

• Compact square pods fit many locations where larger lights cannot
• SAE J583 optics provide controlled foreground coverage when properly aimed
• High-output configurations deliver substantial illumination from a small housing
• Multiple color choices let customers prioritize clarity, contrast, or flexibility
• Aluminum construction protects the electronics and supports heat dissipation
• Polycarbonate lenses withstand impacts from road and trail debris
• IP68 sealing protects against dust and water ingress
• Wide-voltage operation supports many automotive and specialty applications

 

---

 

What's Included

• Rigid D-Series SAE Fog Lights in the selected quantity and output configuration
• Mounting hardware where supplied with the selected configuration
• Wiring or switching components where supplied with the selected configuration
• Application-specific brackets when purchased as a vehicle-specific kit

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm output color, light quantity, mounting clearance, bracket compatibility, connector type, and harness requirements before installation.
• Mount the pods securely on a rigid surface and route wiring away from heat, sharp edges, moving parts, and pinch points.
• Use the correct switching circuit for dual-color operation and protect every connection against water and abrasion.
• Aim the fog beam low and wide after installation to preserve controlled road-focused illumination.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID warranty coverage varies by D-Series configuration and applies to qualifying defects under the terms supplied with the product.

Coverage typically excludes improper installation, incorrect wiring, misuse, unauthorized modification, over-voltage, damaged seals or connectors, impact damage outside warranty terms, and non-compliant use. Proof of purchase may be required for a claim.