Rigid Chase 28" Rear Facing 27 mode LED Light Bar

 

The RIGID Chase 28-Inch Rear Facing 27-Mode LED Light Bar is a programmable rear-lighting system for customers who need clear signaling and vehicle identification in off-road, racing, convoy, and overland environments. The long, narrow bar combines running, brake, reverse, turn-signal, and alert functions in one assembly, giving trailing drivers a recognizable visual reference when dust, fog, darkness, or terrain hides the vehicle body. Its broad rear presentation is suited to UTVs, rails, buggies, Jeeps, trucks, and purpose-built off-road machines.

Twenty-seven pre-programmed modes provide a wide range of strobe, scroll, flash, and full-output patterns. A running trigger and three auxiliary programmable triggers allow installers to assign different behaviors to vehicle circuits or switches. With more than 300,000 possible configurations, customers can tailor the bar for routine trail travel, organized racing, convoy communication, recovery support, or event-specific signaling requirements.

The five-color LED system uses red, white, blue, green, and amber output. This color range supports conventional running, brake, reverse, and turn functions while also providing attention-getting identification patterns for compatible race or off-road use. Customers should match the programmed colors and flashing behavior to the rules governing the intended venue because colored rear lighting can be restricted outside controlled environments.

The bar operates from 9 to 16 volts DC and draws about 25 watts, making it compatible with common powersports and automotive electrical systems when properly fused and wired. Integrated thermal management, a pressure-equalizing vent, an aluminum heat-sink housing, and a high-impact polycarbonate lens support dependable operation in demanding conditions. IP68 sealing protects against dust and water ingress, while SAE J575 shock and vibration compliance supports use on rough terrain.

Two mounting styles adapt the bar to different rear structures. Adjustable tube mounts fit compatible 1.75-inch to 2-inch roll cages, while 15-degree horizontal brackets suit flat surfaces, fabricated racks, and selected bumper or panel locations. Both layouts should position the light where following drivers can see the full bar without obstruction from spare tires, cargo, bodywork, or roof structures.

Professional installation is strongly recommended because the value of the system depends on correct trigger wiring, programming, circuit protection, and function testing. A 13-inch lead supports custom electrical integration, but the installer must still plan all brake, reverse, running, turn, and auxiliary inputs. Whether customers are upgrading for racing, group rides, convoy visibility, reverse lighting, or programmable rear communication, the RIGID Chase 28-Inch Rear Facing 27-Mode LED Light Bar delivers advanced control and a highly visible rear-lighting platform. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Programmable 28-inch rear-facing LED chase light bar

Brand: RIGID Industries

Length: 28-inch class

Lighting Functions: Running, brake, reverse, turn signal, strobe, scroll, flash, and full-output modes

Pre-Programmed Modes: 27

Programmable Triggers: Running trigger plus three auxiliary triggers

Configuration Capacity: More than 300,000 possible combinations

LED Colors: Red, white, blue, green, and amber

Operating Voltage: 9 to 16 volts DC

Power Draw: Approximately 25 watts

Housing: Aluminum heat-sink construction

Lens: High-impact polycarbonate

Ingress Protection: IP68 dust and water resistant

Shock and Vibration: SAE J575 compliant

Operating Temperature: -40 degrees F to 158 degrees F

Fitment Type: Universal off-road

Functionality:

• Combines several rear signaling and utility functions in one full-width bar
• Lets installers assign lighting behavior to running and auxiliary triggers
• Supports highly visible patterns for dust, fog, darkness, and race environments
• Provides reverse-light capability for backing, loading, recovery, and camp tasks
• Uses five LED colors for conventional signals and compatible identification needs
• Offers tube-mount and surface-mount solutions for different rear structures
• Allows user-defined programming beyond the included pre-set modes
• Supports off-road vehicles that need clear rear communication during group travel

 

---

 

Available Options

The RIGID Chase 28-Inch Rear Facing 27-Mode LED Light Bar is available with two mounting configurations:

• Tube Mount - Uses adjustable brackets for compatible 1.75-inch to 2-inch roll cages and other tube-style rear structures.
• Surface Mount - Uses 15-degree horizontal brackets for compatible flat panels, bumpers, racks, and fabricated mounting surfaces.

Choose the tube-mount version for compatible roll cages and bar structures, or choose the surface-mount version for rigid flat mounting points and fabricated rear panels.

 

---

 

Why Choose

This product is ideal for customers who want maximum rear-lighting flexibility with programmable modes, multiple colors, and integrated vehicle-signal functions.

• Creates a large, easy-to-recognize rear lighting signature for trailing vehicles
• Replaces several separate lamps with one programmable assembly
• Allows extensive customization for trail, convoy, race, and support use
• Supports running, brake, reverse, turn-signal, and alert patterns
• Offers mounting choices for both cages and flat rear structures
• Uses sealed, impact-resistant construction for harsh off-road exposure
• Provides programmable trigger control for a clean and coordinated electrical system
• Fits customers who need advanced rear communication rather than a simple marker light

 

---

 

What's Included

• One RIGID Chase 28-Inch programmable LED light bar
• Mounting brackets for the selected tube-mount or surface-mount configuration
• Mounting hardware
• 13-inch wiring lead for custom integration

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Select the mounting version that matches the rear structure and verify that the complete light bar remains visible from behind.
• Wire the running and auxiliary triggers to properly fused vehicle circuits or controls for the intended brake, reverse, turn, and alert functions.
• Program and test every trigger before use, confirming that no mode creates an unsafe or prohibited signal in the intended environment.
• Professional installation is strongly recommended because mounting, trigger logic, programming, and circuit protection must work together correctly.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID Industries provides a Limited Lifetime Warranty for the Chase LED light bar.

Warranty coverage typically excludes improper installation, incorrect wiring, misuse, unauthorized modifications, electrical overloading, tampering, impact damage outside the warranty terms, or non-compliant use. Proof of purchase may be required for a claim.