Disclaimer: Product information and images are provided by the manufacturer. While we strive for accuracy, LEER is not responsible for errors, omissions, or discrepancies in manufacturer-supplied-content.

Product Details

RIGID A-Series LED Accessory Light - White combines a compact universal flood light with a clean white housing for boats, RVs, campers, trailers, light-colored interiors, storage compartments, and specialty equipment. The 2 x 3 inch fixture fits where a conventional work light would be oversized, while the white finish blends naturally with fiberglass, painted panels, headliners, cabinetry, and marine trim. Its lightweight construction makes it easy to mount without adding bulky support hardware.

The broad flood pattern is designed for close-range illumination in cabins, cargo areas, engine compartments, truck beds, helm areas, and access points. Customers can add useful light for loading, inspections, repairs, storage organization, and courtesy illumination without installing a large exposed pod. The shallow housing also helps preserve headroom and clearance in compact interior or equipment areas.

Included flat and tube mounting components allow the fixture to adapt to smooth panels, cabinetry, rails, cages, and suitable round supports. A rubber flat mount, permanent adhesive pad, two-way flat pad, and radius tube adapter provide several installation approaches. Side and bottom wire exits give installers more control over the cable path, helping the light sit close to the mounting point and maintain a tidy appearance.

High-grade aluminum construction, an impact-resistant polycarbonate lens, epoxy sealing, and IP69K dust and water protection support use in marine and vehicle environments. SAE J575 shock and vibration compliance helps the light tolerate movement and rough travel, while integrated thermal management and electrical protection support dependable operation. The white housing provides appearance flexibility without changing the rugged foundation of the A-Series design.

White-housing versions focus on Natural White and Cool White LED output. The Low Power Natural White version gives interior and utility areas a balanced neutral tone, while Low Power Cool White provides a crisper appearance at the same lower electrical demand. High Power Cool White increases task-light intensity for work areas, larger compartments, and locations where additional brightness is more important than minimum power draw.

The universal two-wire connection works with common mobile electrical systems when protected by appropriate switching, fuse capacity, grounding, and wire routing. Customers should choose the output level and color temperature before installation because the white housing is offered in a smaller set of combinations than the black version. Whether customers are upgrading for marine cabins, RV storage, trailer interiors, cargo lighting, under-hood work, or clean white-fixture integration, RIGID A-Series LED Accessory Light - White delivers compact flood illumination with flexible mounting. Now Available at LEER!

Features & Specifications

Product Type: Compact universal LED accessory light

Brand: RIGID Industries

Housing Color: White

Housing Size: Approximately 2 x 3 inches

Housing Material: High-grade aluminum alloy

Lens Material: Impact-resistant polycarbonate

Beam Pattern: Wide flood

Power Options: Low-power 4W and high-power 6W versions

LED Colors: Natural White and Cool White depending on power level

Operating Voltage: 10V to 28V DC

Ingress Protection: IP69K dust and water protection

Compliance: SAE J575 shock and vibration compliant

Wire Connection: Two-wire open lead with side or bottom exit

Vehicle Fitment: Universal

Functionality:

Adds clean white-housing illumination to marine cabins, RV interiors, trailers, cargo areas, and equipment
Provides close-range flood lighting for loading, storage, inspection, repair, and courtesy use
Mounts to flat mounting points or suitable tubing with included adapter components
Supports side or bottom wire routing for different panel and rail orientations
Operates on common 12V and 24V mobile electrical systems within the supported range
Handles wet and dusty environments with sealed IP69K construction
Offers neutral and cool white output choices for different visual preferences
Fits compact areas because the housing is only about 2 x 3 inches

Available Options

The RIGID A-Series LED Accessory Light in White is available in three confirmed output and color combinations:

Low Power Natural White - Provides balanced neutral-white utility light with a 4W electrical load.
Low Power Cool White - Provides a crisp cool-white appearance for courtesy, interior, and lower-demand area lighting.
High Power Cool White - Provides stronger cool-white task lighting for work areas, larger compartments, and brighter utility use.

Choose Low Power Natural White for a balanced cabin or interior tone, choose Low Power Cool White for a crisper accent, or choose High Power Cool White when stronger task lighting is the priority.

Why Choose

This product is ideal for customers who want compact waterproof illumination in a white housing that blends with marine, RV, trailer, and light-colored interior mounting points.

Uses a clean white housing that integrates naturally with fiberglass, cabinetry, painted panels, and light trim
Fits locations where conventional work lights are too large or visually intrusive
Includes flat-mounting point and tube-mount components for installation flexibility
Offers side or bottom wire exits for a clean, close-mounted appearance
Provides IP69K protection for wet, dusty, and wash-down environments
Uses aluminum construction and an impact-resistant lens for mobile applications
Works with common 12V and 24V systems within its supported operating range
Offers neutral-white and cool-white options in low-power and high-power forms

What's Included

One RIGID A-Series LED Accessory Light with white housing in the selected power level and LED color
Rubber flat-mount component
Permanent adhesive mounting pad
Two-way pad for flat mounting
Radius tube-mount adapter
Two-wire open lead approximately three feet long
Mounting hardware supplied with the light

Note: Confirm included components before installation.

Installation Notes

Select a flat or tubular mounting location with safe clearance from heat, moving parts, sharp edges, moisture collection, and direct impact.
Choose the side or bottom wire exit that creates the cleanest protected path through the panel, cabin, rail, or equipment structure.
Connect the two-wire lead through appropriate fuse protection, switching, and grounding for the supported DC system.
Confirm Natural White or Cool White output and Low Power or High Power operation before final installation.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

Warranty Information

RIGID Industries supports eligible A-Series lights with a limited lifetime warranty against qualifying defects in materials and workmanship.

Warranty coverage typically excludes improper installation, misuse, modification, electrical faults, overloading, tampering, impact damage outside warranty terms, normal wear, and non-compliant use. Proof of purchase may be required for a claim.

RIGID Industries A-Series LED Accessory Light, White Housing