Disclaimer: Product information and images are provided by the manufacturer. While we strive for accuracy, LEER is not responsible for errors, omissions, or discrepancies in manufacturer-supplied-content.

Product Details

RIGID A-Series LED Accessory Light - Black puts dependable area lighting into a compact housing that can fit inside cabs, engine compartments, truck beds, storage boxes, trailers, boats, RVs, and specialty equipment. The low-profile 2 x 3 inch fixture weighs only a fraction of a pound, making it easy to add useful light without a large bracket or heavy support. Its black housing blends naturally with dark trim, chassis components, tool storage, and most vehicle interiors.

A wide flood pattern is designed for nearby work rather than long-range driving. Customers can use the A-Series to illuminate a cargo compartment, find tools, inspect an engine bay, light a marine cabin, or add courtesy lighting around steps and access points. Side and bottom wire-exit choices help the fixture sit close to the mounting mounting point while keeping the cable path appropriate for the installation.

The included mounting system supports both flat mounting points and round tubing. A rubber flat mount, permanent adhesive pad, two-way flat pad, and radius tube adapter allow the same compact light to work across many vehicle and equipment layouts. This flexibility is valuable in custom builds where available room, wire direction, and service access matter more than a vehicle-specific bracket.

High-grade aluminum construction, an impact-resistant polycarbonate lens, epoxy sealing, and IP69K dust and water protection support use in demanding environments. Integrated thermal management and electrical protection help the light handle extended operation and common voltage conditions. SAE J575 shock and vibration compliance also makes the fixture suitable for mobile applications that see rough roads, trail vibration, or marine movement.

Black-housing versions are available in low-power and high-power outputs with several LED colors. Natural White and Cool White support task and utility lighting, Amber can reduce harsh white reflection in dust or haze, and Red or Blue can serve specialty, identification, or accent uses where permitted. Output varies with the selected color and power level, so customers can prioritize lower demand or stronger task illumination.

The universal design works with common vehicle and equipment electrical systems and includes a two-wire open lead for custom connection. Installers should add appropriate switching, fuse protection, grounding, and wire protection for the intended environment. Whether customers are upgrading for cab lighting, under-hood work, truck-bed illumination, marine utility, trailer access, or custom accent lighting, RIGID A-Series LED Accessory Light - Black delivers durable area light from an exceptionally compact housing. Now Available at LEER!

Features & Specifications

Product Type: Compact universal LED accessory light

Brand: RIGID Industries

Housing Color: Black

Housing Size: Approximately 2 x 3 inches

Housing Material: High-grade aluminum alloy

Lens Material: Impact-resistant polycarbonate

Beam Pattern: Wide flood

Power Options: Low-power 4W and high-power 6W versions

LED Colors: Natural White, Cool White, Amber, Red, and Blue depending on power level

Operating Voltage: 10V to 28V DC

Ingress Protection: IP69K dust and water protection

Compliance: SAE J575 shock and vibration compliant

Wire Connection: Two-wire open lead with side or bottom exit

Vehicle Fitment: Universal

Functionality:

Adds compact area lighting to cabs, cargo compartments, truck beds, trailers, boats, RVs, and equipment
Provides close-range flood illumination for inspections, loading, storage access, and work tasks
Supports flat-mounting point and tube mounting with included adapter components
Allows side or bottom wire routing to suit different installation orientations
Operates on common 12V and 24V mobile electrical systems within the supported range
Handles harsh environments with sealed construction and IP69K protection
Offers white and colored LED choices for utility, night-friendly, identification, and accent use
Fits tight areas because the housing is only about 2 x 3 inches

Available Options

The RIGID A-Series LED Accessory Light in Black is offered in several power and LED color combinations:

Low Power Natural White - Provides neutral white utility light with a 4W electrical load.
Low Power Cool White - Provides a crisp cool-white appearance for lower-demand interior and area lighting.
Low Power Amber - Provides warm output for dusty environments, low-glare utility, and amber accent use.
Low Power Red - Provides red illumination for night-friendly, identification, and specialty applications.
High Power Natural White - Provides stronger neutral-white task lighting from the compact housing.
High Power Cool White - Provides stronger crisp white output for work areas and cargo areas.
High Power Amber - Provides higher-output amber illumination for adverse-condition and specialty use.
High Power Red or Blue - Provides brighter colored output for specialty and accent installations where permitted.

Choose Low Power for courtesy, accent, or lower-demand utility lighting, or choose High Power when the mounting location needs stronger task illumination.

Why Choose

This product is ideal for customers who want a small waterproof fixture with broad flood coverage, multiple mounting methods, and several output and color choices.

Fits areas where conventional pods and work lights are too large
Includes hardware for both flat mounting points and round tubing
Offers side or bottom wire exits for cleaner routing in tight installations
Uses aluminum construction and an impact-resistant lens for mobile environments
Provides IP69K sealing for dust, water, and pressure-wash exposure
Includes thermal, polarity, and voltage protection features
Works with common 12V and 24V systems within its operating range
Offers low-power, high-power, white, amber, red, and blue choices for different tasks

What's Included

One RIGID A-Series LED Accessory Light with black housing in the selected power level and LED color
Rubber flat-mount component
Permanent adhesive mounting pad
Two-way pad for flat mounting
Radius tube-mount adapter
Two-wire open lead approximately three feet long
Mounting hardware supplied with the light

Note: Confirm included components before installation.

Installation Notes

Select a flat or tubular mounting location with safe clearance from heat, moving parts, sharp edges, and direct impact.
Choose the side or bottom wire exit that creates the cleanest protected cable route for the installation.
Connect the two-wire lead through appropriate fuse protection, switching, and grounding for the supported DC system.
Confirm the selected power level and LED color before final installation because appearance and electrical demand vary by version.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

Warranty Information

RIGID Industries supports eligible A-Series lights with a limited lifetime warranty against qualifying defects in materials and workmanship.

Warranty coverage typically excludes improper installation, misuse, modification, electrical faults, overloading, tampering, impact damage outside warranty terms, normal wear, and non-compliant use. Proof of purchase may be required for a claim.

RIGID Industries A-Series LED Accessory Light, Black Housing