Rigid 360-Series PRO Fog Light

 

The Rigid 360-Series PRO Fog Light combines a round auxiliary-light appearance with a controlled SAE J583 fog beam for customers who want stronger poor-weather visibility. Its compact circular housing fits naturally with many modern bumpers, grille guards, and custom light mounts while maintaining a clean finished look. The light is suited to trucks, SUVs, work vehicles, and off-road builds that spend time in fog, rain, snow, dust, or dark rural conditions.

A useful fog beam stays low and spreads light across the foreground instead of throwing uncontrolled glare high into the driver's view. The 360-Series PRO optic illuminates the road surface, shoulders, lane edges, and nearby hazards, helping customers read the immediate driving area when weather reduces contrast. Proper mounting and aiming are essential because controlled placement is what turns strong LED output into useful visibility.

The dual-color version allows customers to switch between white and selective yellow output from the same pair of lights. White light provides a crisp modern appearance for clear-night travel, while selective yellow can improve visual contrast in fog, blowing dust, rain, and snow. Both colors may also be operated together on supported setups for added intensity where that use is permitted.

The 4-inch dual-color configuration operates from 9V to 36V DC and produces approximately 1,722 raw lumens per light in white mode and 1,722 raw lumens per light in selective-yellow mode. Each light draws approximately 1.4 amps and uses 20W in the selected color mode. These values provide meaningful output in a compact housing while preserving the flexibility to adapt the light color as conditions change.

A rugged aluminum housing protects the internal electronics and provides a durable heat-dissipating structure. The impact-resistant polycarbonate lens shields the optics from road grit and trail debris, while integrated thermal management, pressure equalization, and sealed connectors support reliable service through temperature changes and wet conditions. The black finish and round halo-like outer form give the 360-Series a distinctive look that pairs well with both factory and aftermarket front ends.

The light can be used in universal auxiliary locations or with vehicle-specific brackets that position the round housing in a factory-style opening. Customers should confirm whether the selected configuration is a single light or pair, verify the harness and switching requirements, and set the beam height after installation. Whether customers are upgrading for dense fog, winter travel, dusty roads, nighttime work, or adaptable front-end lighting, the Rigid 360-Series PRO Fog Light delivers controlled illumination with rugged round-housing style. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Round SAE fog LED auxiliary light

Brand: RIGID Industries

Series: 360-Series PRO

Light Size: 4-inch round housing on the dual-color configuration

Beam Pattern: SAE J583 fog

Output Colors: White and selective yellow on the dual-color configuration

Raw Lumens: Approximately 1,722 per light in white mode and 1,722 per light in selective-yellow mode

Power: 20W per light in the selected color mode

Current Draw: Approximately 1.4 amps per light in the selected color mode

Input Voltage: 9V to 36V DC

Housing: Rugged aluminum

Lens: Impact-resistant polycarbonate

Mounting Style: Universal or application-specific auxiliary mounting

Functionality:

• Creates a low, wide beam for the road surface, shoulders, lane edges, and nearby hazards
• Improves visibility in fog, dust, rain, snow, and other low-contrast conditions
• Allows supported dual-color setups to switch between crisp white and selective yellow
• Fits many bumper, grille guard, and custom auxiliary mounting locations
• Uses a compact round housing that complements modern vehicle styling
• Protects the optic with an impact-resistant lens and rugged aluminum body
• Manages heat and internal pressure for more consistent operation in changing weather
• Provides an SAE J583 fog pattern when properly installed and aimed

 

---

 

Available Options

The Rigid 360-Series PRO Fog Light is available in multiple fog-light configurations:

• White Output - A crisp output for customers who prioritize clear-night visibility and a neutral modern light color.
• Selective Yellow Output - A contrast-focused choice for frequent travel in fog, rain, snow, dust, and other reduced-visibility conditions.
• White and Selective Yellow Dual Color - Lets customers switch between the two colors from one compact round light pair and use the output that best matches current conditions.
• Single Light or Pair - Supports replacement, custom fabrication, or complete left-and-right installations depending on the selected configuration.

Choose white for crisp general visibility, choose selective yellow for poor-weather contrast, or choose dual color for the most adaptable fog-light setup.

 

---

 

Why Choose

This product is ideal for customers who want controlled SAE fog lighting, rugged round-housing construction, and adaptable output color.

• Round 4-inch styling works well with many factory and aftermarket bumper designs
• SAE J583 optics keep the useful beam low and wide when correctly aimed
• Dual-color capability lets customers adapt output to weather and driving conditions
• Compact dimensions provide strong lighting without the visual bulk of a large light bar
• Aluminum construction supports heat management and long-term durability
• Polycarbonate lens material resists impacts from road and trail debris
• Wide-voltage operation suits many automotive and specialty vehicle electrical systems
• Universal and vehicle-specific mounting choices support a range of build plans

 

---

 

What's Included

• Rigid 360-Series PRO Fog Light or light pair in the selected configuration
• Output-color functionality associated with the selected part
• Mounting hardware where supplied with the selected configuration
• Wiring or switching components where supplied with the selected configuration

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm light quantity, output color, bracket compatibility, harness requirements, and mounting clearance before installation.
• Position the lights low enough to use the fog optic effectively, then secure all fasteners and route wiring away from heat, sharp edges, and moving parts.
• Use a compatible switch or control circuit for dual-color operation and weather-seal every electrical connection.
• Aim the beam after installation so it remains low, broad, and controlled for the intended application.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

RIGID warranty coverage varies by the selected 360-Series PRO configuration and applies to qualifying defects under the terms supplied with the product.

Coverage typically excludes improper installation, incorrect wiring, misuse, unauthorized modification, overvoltage, damaged connectors or seals, impact damage outside warranty terms, and non-compliant use. Proof of purchase may be required for a claim.