LOGIQ AirIQ SD2 Air Management Package

 

LOGIQ AirIQ SD2 Air Management Package gives customers app-based 2-channel control for load-leveling air suspension and helper bag systems. Built for trucks and SUVs that tow, haul, carry tools, or manage uneven cargo, the SD2 package helps customers adjust two air springs individually from the AirIQ app. It is a strong choice for customers who want more control than a single-channel setup while keeping the system focused around a standard-duty compressor.

The SD2 system uses dual-channel valving so each rear air spring can be managed separately. That independent control is especially useful when cargo, trailer tongue weight, equipment, or gear does not load the vehicle evenly from side to side. Customers can fine-tune left and right air pressure to help the vehicle sit more level, feel more stable, and respond better to changing load conditions.

LOGIQ pairs the SD2 air management system with a standard-duty compressor rated at 2.03 CFM at 0 psi. The compressor supports up to 150 psi and carries a 25 percent duty cycle at 100 psi, giving customers dependable onboard air delivery for routine pressure adjustments. For drivers who want independent air spring control without stepping into a heavy-duty compressor package, the SD2 system offers a balanced setup for everyday towing, hauling, and load support.

The complete package is factory assembled and tested to help simplify installation and support dependable performance. The AirIQ SD2 system includes a 20 ft wiring harness pre-installed, along with frame mounting brackets, mounting hardware, installation components, air line, fuse taps, wire loom, plumbing, and wiring. That complete approach helps customers move from manual air inflation to Bluetooth air management without building the system from separate major parts.

The system is designed for 12-volt vehicle electrical systems and includes IP54 compressor protection with IP67 protection for other components. That durability helps support vehicle-mounted use where components may be exposed to road spray, weather, dust, and debris. Careful mounting, wire routing, air line routing, and leak checking are still important so the system can perform properly after installation.

The LOGIQ AirIQ SD2 Air Management Package is ideal for customers who need individual air spring control, app-based convenience, and standard-duty compressor performance in one complete package. It helps customers adjust for uneven loads, trailer weight, work equipment, camping gear, or changing cargo without relying only on manual fill valves. Whether customers are upgrading for towing, hauling, load leveling, work truck support, or easier air spring adjustment, the LOGIQ AirIQ SD2 Air Management Package delivers convenient 2-channel air management with standard-duty onboard air performance. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: 2-channel air management package

Brand: LOGIQ

Series: AirIQ SD2

Control Type: Bluetooth control through the AirIQ app

Channel Layout: 2-channel control for individual control of two air springs

Compressor Type: Standard-duty air compressor

Compressor Output: 2.03 CFM at 0 psi

Maximum Pressure: 150 psi

Compressor Duty Cycle: 25 percent at 100 psi

Ingress Protection Rating: IP54 compressor and IP67 other components

Voltage: 12 volts

Current Draw: 30 amps

Included Air Line: 20 ft of 1/4 inch air line

Functionality:

• Provides app-based pressure control for compatible load-leveling air spring systems
• Allows individual control of two rear air springs for side-to-side adjustment
• Helps manage offset cargo, trailer tongue weight, work equipment, and uneven loads
• Supports quick air pressure changes for towing, hauling, travel, and daily driving
• Standard-duty compressor provides onboard air delivery for routine suspension adjustments
• Factory assembled and tested package helps simplify installation compared with pieced-together systems
• Included frame mounting brackets help support a clean vehicle-mounted setup
• Bluetooth control lets customers adjust air pressure from a compatible mobile device

 

---

 

Why Choose

This product is ideal for customers who want independent 2-channel air spring control with app-based adjustment and standard-duty compressor performance.

• Dual-channel control helps customers manage uneven loads more precisely than a single-channel setup
• AirIQ app control makes suspension pressure changes easier than manual inflation alone
• Standard-duty compressor output supports everyday towing, hauling, and cargo adjustment needs
• Pre-assembled system design helps reduce installation guesswork and component matching
• Helps improve loaded stance and stability when cargo or trailer weight changes
• Useful for tow rigs, work trucks, overlanding builds, daily drivers, and cargo-heavy vehicles
• Included installation components help support a more complete air management upgrade
• Gives customers a balanced AirIQ option between simple single-channel control and heavy-duty compressor performance

 

---

 

What's Included

• LOGIQ AirIQ SD2 air management system with 20 ft wiring harness pre-installed
• Standard-duty air compressor
• 2-channel Bluetooth air management control system
• Four frame mounting brackets
• Frame mounting hardware kit
• AirIQ SD2 installation kit
• 20 ft of 1/4 inch air line
• Fuse taps
• 18 ft wire loom
• Plumbing kit and wiring components

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm compatibility with the selected air spring or helper bag system before installation.
• Mount the system in a secure location that protects the compressor, wiring, air lines, and control components while allowing service access.
• Route air lines and wiring away from exhaust heat, sharp edges, moving suspension parts, steering components, and pinch points.
• After installation, check electrical connections, app communication, compressor operation, air line routing, and all air fittings for leaks before regular use.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

LOGIQ air suspension and air management products are generally supported by warranty coverage for qualifying components, with coverage subject to proper installation, normal use, and proof of purchase requirements. Air compressor warranty coverage may differ from other air management components.

Warranty coverage typically excludes improper installation, misuse, modifications, electrical issues, overloading, tampering, impact damage outside warranty terms, or non-compliant use. Confirm current warranty terms before installation or claim submission.