Bodyguard T2 Series Extreme Base Front Bumper

 

Bodyguard T2 Series Extreme Base Front Bumper gives trucks and work vehicles a heavy-duty front-end upgrade built for serious protection, rugged styling, and practical utility. It is designed for customers who need more strength than a factory bumper can provide while keeping a clean, professional appearance for work, towing, fleet use, off-road travel, and daily driving. The T2 Series Extreme Base design delivers a bold full-width bumper profile with the durability needed for demanding environments.

The full-width base layout helps protect the front bumper area from brush, gravel, road debris, worksite hazards, and minor contact. Its strong replacement-bumper design adds more confidence than a light-duty accessory while avoiding unnecessary complexity for customers who want dependable front-end protection. This makes it a strong choice for work trucks, ranch trucks, tow vehicles, utility builds, and heavy-duty personal vehicles.

Heavy-duty steel construction gives the T2 Series Extreme Base Front Bumper the strength needed for tough truck use. Compatible configurations feature a 3/16 inch channel-style frame with diamond plate body construction, creating a reinforced structure that supports both worksite durability and off-road confidence. The bumper is engineered for customers who expect their truck accessories to stand up to repeated use in harsh conditions.

The grille guard style structure adds a rugged front-end appearance while helping protect critical front-end areas. Compatible configurations use 2 inch OD tubing and 3/4 inch shackle mount locations, giving the bumper added visual strength and practical utility when properly equipped. The T2 Series Extreme Base design does not rely on factory tow hook provisions, so recovery planning should be matched to the bumper's rated shackle mount setup and appropriate recovery gear.

Finish options help customers match the bumper to the vehicle and the job. Available powder coat finishes can include gloss black and textured black depending on the selected application, giving customers the choice between a cleaner heavy-duty look or a more aggressive utility-truck appearance. These black powder-coated finishes help protect the steel from corrosion, road spray, mud, and changing weather conditions.

Integrated accessory support makes the T2 Series Extreme Base Front Bumper more than a protection upgrade. Compatible configurations include a 20 inch light bar cutout, factory fog light or 3 inch cube light mounting options, a bolt-on license plate bracket, parking sensor holes with optional plugs, and center skid plate choices. Select applications also support a 2 inch receiver tube or winch mount layout, giving customers flexibility to build the bumper around work, utility, lighting, and recovery needs.

Vehicle-specific mounting helps the Bodyguard T2 Series Extreme Base Front Bumper install securely and maintain a clean finished appearance. Many applications are designed for bolt-on installation using included vehicle-specific brackets and hardware, though sensor setup, lighting fitment, skid plate selection, receiver access, winch setup, and adaptive cruise control compatibility can vary by vehicle. Whether customers are upgrading for extreme-duty protection, fleet reliability, jobsite durability, auxiliary lighting capability, utility features, or a stronger heavy-duty appearance, the Bodyguard T2 Series Extreme Base Front Bumper delivers reinforced steel strength with practical T2 Series function. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Full replacement front bumper and front-end protection

Brand: Bodyguard

Series: T2 Series Extreme Base

Mounting Location: Front end

Vehicle Fitment: Vehicle-specific truck and work vehicle applications

Material: Heavy-duty steel construction

Frame Construction: 3/16 inch channel-style steel frame on compatible configurations

Body Construction: Diamond plate steel body construction on compatible configurations

Tubing: 2 inch OD tubing on compatible configurations

Finish Options: Gloss black powder coat or textured black powder coat depending on application

Design: Full-width Extreme Base front bumper design with heavy-duty grille guard styling

Lighting: Compatible 20 inch light bar cutout with factory fog light or 3 inch cube light mounting options depending on configuration

Recovery Support: 3/4 inch shackle mount locations on compatible configurations

Utility Support: Standard skid plate, 2 inch receiver tube, or winch mount center section options depending on selected configuration

Factory Feature Support: Parking sensor holes with optional plugs and adaptive cruise control compatibility on select applications

Installation Style: Vehicle-specific bolt-on installation on many applications

Functionality:

• Adds heavy-duty front-end protection for compatible trucks and work vehicles
• Helps protect the bumper area from brush, gravel, road debris, worksite hazards, and minor contact
• Full-width base design supports rugged coverage with a clean professional appearance
• Channel-style steel frame and diamond plate construction provide strength for demanding use
• Light bar, fog light, and cube light options make auxiliary visibility upgrades easier to plan
• Center section options allow customers to choose skid plate, receiver tube, or winch mount utility
• Shackle mount locations add practical recovery planning support when properly equipped
• Vehicle-specific design helps create a clean, secure, and integrated installed fit

 

---

 

Available Options

The Bodyguard T2 Series Extreme Base Front Bumper is available in multiple application-based configurations:

• Gloss Black Powder Coat - A clean black finish option for customers who want a polished heavy-duty appearance.
• Textured Black Powder Coat - A rugged finish option for customers who want a more aggressive work-truck or off-road appearance.
• Standard Skid Plate Setup - A practical center-section layout for customers who want straightforward lower-front protection.
• 2 Inch Receiver Tube Setup - A utility-focused option for customers who want added front receiver functionality on compatible applications.
• Winch Mount Setup - A recovery-focused center-section option for customers who want to add a compatible winch when properly matched and installed.
• Factory Fog Light Setup - Select configurations include factory fog light cutouts with trim or mesh components depending on application.
• 3 Inch Cube Light Setup - Select configurations support compatible cube lights for customers who want a custom auxiliary lighting layout.
• Sensor-Compatible Setup - Compatible applications include parking sensor holes with optional plugs to support trucks with or without sensors.

Choose the finish, center section, and lighting layout that best match the vehicle's work, utility, visibility, and recovery needs. Confirm sensor, adaptive cruise control, fog light, receiver, winch, and light bar compatibility for the selected application before installation.

 

---

 

Why Choose

This product is ideal for customers who want a heavy-duty steel front bumper with full-width protection, utility-focused options, auxiliary lighting support, and vehicle-specific fitment.

• Provides stronger front-end protection than a factory bumper setup
• Extreme Base design works well for work trucks, fleet vehicles, tow vehicles, ranch trucks, and heavy-duty personal builds
• Steel channel frame and diamond plate body construction support demanding environments
• 2 inch OD tubing adds rugged grille guard styling and front-end presence
• Center section options allow customers to choose skid plate, receiver tube, or winch mount function
• Light bar, factory fog light, and cube light provisions support improved visibility
• Parking sensor support on compatible applications helps preserve modern truck functionality
• Made in the USA listing supports customers who prefer American-built truck protection equipment

 

---

 

What's Included

• T2 Series Extreme Base front bumper assembly
• Vehicle-specific mounting brackets on compatible configurations
• Installation hardware
• 2 inch OD grille guard structure on compatible configurations
• Center skid plate, receiver tube, or winch mount components based on selected configuration
• Bolt-on license plate bracket
• Parking sensor plugs on compatible configurations
• Factory fog light or cube light mounting provisions on compatible configurations
• Installation instructions when supplied with the selected configuration

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm vehicle-specific fitment before installation, including trim level, factory bumper equipment, parking sensors, adaptive cruise control, fog light style, receiver needs, winch plans, and auxiliary lighting setup.
• Many applications are designed for bolt-on installation using included vehicle-specific brackets and hardware.
• Wiring is required when adding compatible auxiliary lighting, and winch wiring is required when installing a compatible winch.
• Review the application instructions before installation because sensor placement, adaptive cruise control compatibility, light bar fitment, fog light mounting, cube light setup, receiver access, winch fitment, shackle use, and bumper alignment can vary by vehicle.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Bodyguard T2 Series Extreme Base Front Bumper warranty coverage may include limited lifetime warranty protection against manufacturing defects in workmanship or material. Powder coat finishes may include limited one-year warranty coverage from the original purchase date, depending on the selected configuration, seller, and current warranty terms.

Warranty coverage typically excludes improper installation, road hazards, rock chips, normal wear and tear, weather-related damage, misuse, abuse, impact damage, collision damage, product alteration, product modification, chemical exposure, salt or brine buildup, improper cleaning, lack of maintenance, labor costs, removal costs, installation costs, freight costs, fuel costs, mileage costs, incidental costs, consequential damage, or non-compliant use. Proof of purchase, written defect description, and high-resolution photos may be required for warranty claims.