Baja Designs Squadron SAE LED Auxiliary Light Pod Pair

 

The Baja Designs Squadron SAE LED Auxiliary Light Pod Pair gives customers a matched fog-light pair built around a controlled road-oriented beam rather than an unrestricted off-road pattern. Each compact pod uses aspheric projector optics to place illumination across the near field with a sharp upper cutoff. When mounted and aimed correctly, the pair improves recognition of lane edges, road texture, standing water, dust, fog, and other close-range conditions without sending unnecessary glare above the intended beam.

Each light produces 2,420 lumens and up to 15,800 candela at 29 watts, directing the output into Lighting Zone 1. The optical system is engineered to meet SAE J583 fog lamp requirements, giving customers a dedicated pattern for poor weather and low-mounted road illumination. This controlled approach makes the pair fundamentally different from a general auxiliary pod that spreads light into multiple zones.

Hard anodized and powder coated cast aluminum housings, hardcoated polycarbonate projector lenses, stainless steel hardware, built-in overvoltage protection, IP69K water resistance, IK10 impact compliance, and testing beyond MIL-STD810G support daily driving and demanding outdoor exposure. The sealed optical assembly protects the regulated pattern and is not intended for customer disassembly. Any service involving the projector should be handled under the applicable repair process.

Clear and Baja Amber lens choices let customers match the fog pattern to local conditions. Clear provides neutral road illumination and natural color recognition, while Baja Amber can reduce reflected glare and improve perceived contrast in fog, dust, rain, and snow. Both versions retain the same Zone 1 purpose and sharp cutoff when installed in the correct orientation.

The pair format provides balanced left and right coverage and includes a wiring harness for a coordinated installation. Mounting height, orientation, bracket position, and final aim are critical because the controlled cutoff must remain level and directed at the road surface. Customers planning an upside-down or sideways installation should have the optics adjusted for the intended orientation before mounting.

The Baja Designs Squadron SAE LED Auxiliary Light Pod Pair is built for customers who want useful poor-weather illumination with controlled placement of light. It supports fog-light replacement, daily driving, trail approaches, and road-to-trail transitions where a broad uncontrolled beam would create glare or wasted output. Whether customers are upgrading for fog, dust, rain, or precise low-mounted visibility, the Baja Designs Squadron SAE LED Auxiliary Light Pod Pair delivers a sharp SAE-oriented pattern from two compact durable pods. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: SAE J583 fog-pattern LED auxiliary light pod pair

Brand: Baja Designs

Series: Squadron SAE

Light Quantity: Two matched light pods

Light Output: 2,420 lumens and up to 15,800 candela per light

Power Draw: 29 watts at 2.1 amps per light

Beam Pattern: SAE Fog with controlled sharp cutoff

Lighting Zone: Zone 1

Lens Colors: Clear and Baja Amber

Housing: Hard anodized and powder coated cast aluminum

Lens: Hardcoated polycarbonate with aspheric projector optics

Dimensions: 3.07 inches by 3.07 inches by 2.77 inches per light

Weight: 0.75 pounds per light

Standard: Engineered to meet SAE J583 fog lamp requirements

Wiring Harness: Included

Service Note: Sealed SAE optics are not customer-serviceable

Functionality:

• Adds controlled low-mounted illumination for fog and poor weather.
• Uses a sharp cutoff to limit light above the intended road zone.
• Supports lane-edge, road-texture, and near-field hazard recognition.
• Provides balanced left and right coverage from a matched pair.
• Offers Clear output for neutral road lighting.
• Offers Baja Amber output for contrast in fog, dust, rain, and snow.
• Includes a coordinated wiring harness for two-light operation.
• Supports road-to-trail transitions without relying on an unrestricted auxiliary pattern.

 

---

 

Available Options

The Baja Designs Squadron SAE LED Auxiliary Light Pod Pair is available with the dedicated SAE Fog pattern in two lens colors:

• SAE Fog Clear - Provides neutral white Zone 1 illumination with a controlled cutoff for daily driving and poor-weather visibility.
• SAE Fog Baja Amber - Uses the same controlled pattern with amber output for customers who prioritize contrast and reduced reflected glare in fog, dust, rain, or snow.
• Matched Pair - Includes two lights, adjustable brackets, stainless steel mounting hardware, and a wiring harness for balanced installation.

Choose Clear for neutral road illumination or Baja Amber for frequent fog, dust, rain, and snow. Both versions require correct orientation and careful aiming to preserve the intended cutoff.

 

---

 

Why Choose

This product is ideal for customers who want a controlled fog pattern that adds useful near-field light while limiting glare above the cutoff.

• Uses dedicated aspheric projector optics rather than a broad off-road reflector.
• Meets the optical purpose of an SAE J583 fog lamp pattern.
• Delivers strong Zone 1 output from a compact three-inch housing.
• Provides Clear and Baja Amber choices for different weather conditions.
• Includes two matched lights and coordinated wiring for balanced coverage.
• Uses rugged materials and environmental protection for daily exterior use.
• Keeps the optical assembly sealed to protect the regulated beam shape.
• Carries Baja Designs warranty coverage and a satisfaction guarantee under the applicable terms.

 

---

 

What's Included

• Two Baja Designs Squadron SAE LED light pods in the selected lens color
• Two adjustable mounting brackets
• Stainless steel mounting hardware
• Two-light wiring harness
• Product documentation

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Mount the pair low enough and aim it carefully so the sharp cutoff remains positioned for controlled Zone 1 illumination.
• The optics are orientation-sensitive; arrange approved optical adjustment before mounting the lights upside down or sideways.
• Confirm bracket compatibility, vehicle wiring capacity, fuse location, switch placement, and local requirements before installation.
• Do not open or alter the sealed SAE projector assembly because tampering can change the beam pattern and affect warranty coverage.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs backs qualifying Squadron SAE products with a limited lifetime warranty and a 30-day satisfaction guarantee under the applicable terms. The sealed projector assembly must be returned for approved repair rather than opened by the customer.

Improper installation, incorrect orientation, unauthorized disassembly, unsuitable wiring, misuse, modification, neglect, or impact damage outside the warranty terms may be excluded. Proof of purchase may be required.