Baja Designs Squadron-R SAE LED Auxiliary Light Pod Pair

 

The Baja Designs Squadron-R SAE LED Auxiliary Light Pod Pair gives customers a matched low-mounted fog-light system with controlled output and compact round styling. The two-pod layout creates a balanced appearance across the front of trucks, SUVs, vans, powersports vehicles, and custom builds while placing useful illumination close to the road surface. Its sharp cutoff is designed to improve near-field visibility without sending excessive light above the intended fog-light zone.

Each pod produces 2,420 lumens and reaches up to 15,800 candela while drawing 29 watts and 2.1 amps. Aspheric projector optics shape the beam into a wide Zone 1 pattern with a defined upper cutoff, helping customers see lane edges, road texture, shoulders, and low obstacles in poor weather. The controlled distribution is especially useful in fog, dust, rain, snow, and road spray, where uncontrolled glare can reduce contrast and make conditions more tiring.

The Squadron-R round face gives the pair a traditional fog-lamp appearance that integrates well with bumper openings and purpose-built brackets. Each housing measures approximately 3.07 inches high by 3.07 inches wide and 2.77 inches deep, preserving mounting flexibility where larger lamps may not fit. A black housing and bezel blend with factory dark trim, powder-coated bumpers, grille structures, and other exterior hardware without overwhelming the front of the vehicle.

Customers can select Clear or Baja Amber lenses while retaining the same SAE fog pattern. Clear produces crisp 5000K-style white illumination that pairs naturally with modern exterior lighting, while Baja Amber adds a warmer beam that can improve visual contrast in airborne dust and moisture. Both choices use the same controlled cutoff, allowing appearance and environmental preference to guide the lens decision rather than changing the basic lighting job.

Hard-anodized and powder-coated cast aluminum housings protect the electronics, and hardcoated polycarbonate lenses resist debris and repeated weather exposure. Stainless steel mounting hardware, built-in overvoltage protection, IP69K water resistance, IK10 impact compliance, and testing beyond MIL-STD810G support dependable performance through vibration, road spray, pressure washing, and rough terrain. The pair is designed to meet SAE J583 fog lamp requirements for controlled on-road fog-light use when properly installed and aimed.

The included wiring harness and matched hardware provide a practical foundation for a complete two-light installation. Correct placement and aiming are essential because the controlled cutoff must remain level and at an appropriate height to deliver useful fog illumination without unwanted glare. Whether customers are upgrading for daily driving, poor-weather visibility, overland travel, or a clean bumper-integrated fog system, the Baja Designs Squadron-R SAE LED Auxiliary Light Pod Pair delivers balanced coverage and precise beam control. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: SAE fog LED auxiliary light pod pair

Brand: Baja Designs

Series: Squadron-R SAE

Light Quantity: Two pods

Beam Pattern: SAE fog with a controlled upper cutoff

Light Output: 2,420 lumens per light

Peak Intensity: Up to 15,800 candela per light

Power Draw: 29 watts and 2.1 amps per light

Lens Colors: Clear and Baja Amber

Dimensions: 3.07 inches high, 3.07 inches wide, and 2.77 inches deep per light

Housing: Hard-anodized and powder-coated cast aluminum

Lens: Hardcoated polycarbonate

Compliance: Designed to meet SAE J583 fog lamp requirements

Environmental Ratings: IP69K water resistance and IK10 impact compliance

Wiring Harness: Included

Functionality:

• Creates a controlled Zone 1 fog pattern with a sharp upper cutoff.
• Improves road-surface and shoulder definition in fog, dust, rain, snow, and road spray.
• Provides a balanced left-and-right installation across the front of the vehicle.
• Fits compact bumper, grille, fog-pocket, powersports, and custom bracket locations.
• Offers Clear and Baja Amber lens choices without changing the basic fog pattern.
• Supports careful vertical and horizontal aiming through adjustable pod mounts.
• Resists water, impact, vibration, and repeated exposure to harsh environments.
• Includes the wiring foundation and mounting hardware for a complete matched-pair setup.

 

---

 

Available Options

The Baja Designs Squadron-R SAE LED Auxiliary Light Pod Pair is offered with two lens-color choices:

• SAE Fog Clear - provides crisp white illumination for a modern appearance and controlled everyday fog-light coverage.
• SAE Fog Baja Amber - adds a warmer beam that can improve contrast in dust, fog, rain, snow, and road spray.

Choose Clear for bright white fog illumination, or choose Baja Amber when warmer color and improved contrast in difficult atmospheric conditions are the main priorities.

 

---

 

Why Choose

This product is ideal for customers who want controlled SAE fog illumination, compact round styling, and a matched two-light installation.

• The sharp cutoff directs useful light low and wide while reducing unnecessary upward glare.
• A matched pair creates even coverage and a finished appearance across the front of the vehicle.
• Compact housings fit many locations where larger lamps or light bars are impractical.
• Clear and Baja Amber choices let customers match beam color to appearance and visibility priorities.
• Aspheric projector optics provide precise distribution rather than uncontrolled scatter.
• Rugged aluminum construction and hardcoated lenses suit daily road use and trail exposure.
• The included harness reduces the number of separate electrical components needed for installation.
• SAE J583 design supports customers seeking a purpose-built fog-light beam when correctly mounted and aimed.

 

---

 

What's Included

• Two Baja Designs Squadron-R SAE LED auxiliary light pods
• Selected Clear or Baja Amber fog lenses
• Wiring harness
• Mounting brackets
• Stainless steel mounting hardware

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Confirm both mounting locations are rigid, level, and clear of bodywork or accessories that could block the beam.
• Route the included harness away from exhaust heat, sharp edges, moving suspension parts, and areas where water can remain trapped.
• Aim both lights evenly so the fog cutoff sits at the correct height and does not create unwanted glare for other road users.
• Do not open or alter the SAE lights; uService is not a feature of all SAE products, and tampering can affect warranty coverage.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs lighting is backed by a limited lifetime warranty covering qualifying defects in design and manufacturing. Warranty service may involve repair, replacement, or another remedy allowed under the terms in effect at the time of the claim, and proof of purchase may be required.

SAE lights should be returned intact for warranty evaluation. Opening, modifying, or tampering with the sealed optical assembly can affect coverage.

Coverage generally excludes installation errors, normal wear, misuse, abuse, neglect, collisions, unauthorized modifications, incorrect wiring, tampering, and damage caused by combinations or alterations not completed by Baja Designs. Customers should retain purchase records, follow the supplied installation guidance, and return the light intact when warranty evaluation is required.