Baja Designs Squadron Pro White Flush Mount LED Auxiliary Light Pod

 

The Baja Designs Squadron Pro White Flush Mount LED Auxiliary Light Pod gives customers a focused way to add high-output flush-mounted illumination without forcing a large fixture into a limited mounting area. A white gloss face complements marine panels, light-colored bodywork, service bodies, trailers, and custom enclosures while keeping the light visually integrated with the surrounding surface. The compact format works especially well on builds where placement, beam control, and a clean finished appearance matter as much as raw brightness.

Spot, Driving/Combo, Wide Cornering, and Work/Scene optics shape the output for distance, mixed forward travel, near-field cornering, reverse use, or broad stationary coverage. Four LEDs produce 4,095 raw lumens per light at 41.4 watts and 3 amps. is organized into usable coverage rather than uncontrolled glare, helping customers place light in the distance, near field, side area, or work zone that matches the selected optic. This makes the light useful as a dedicated upgrade or as one layer within a balanced multi-light system.

The hard anodized and powder coated cast aluminum housing, hardcoated polycarbonate lens, stainless steel hardware, IP69K water resistance, IK10 impact compliance, and testing beyond MIL-STD810G support repeated exterior use. The housing and lens are intended for repeated exposure to vibration, dust, water, debris, and changing temperatures common to off-road and utility use. Built-in overvoltage protection and service-focused component design add practical value for customers planning a long-term installation.

The light is well suited to marine equipment, rear bumpers, utility bodies, cargo panels, custom vehicle panels, trailers, and color-coordinated builds where an exposed black bracket pod would interrupt the finished appearance. The available optical and lens choices let customers tailor the light to speed, terrain, weather, and mounting position instead of accepting one broad beam for every task. Clear output suits general nighttime visibility, while Baja Amber options can support contrast and visual comfort in dust, fog, rain, or snow when offered.

The flush mount layout supports a deliberate installation with room for aiming, wiring protection, and service access. A wiring harness is not included with the single flush mount light and must be selected for the chosen quantity and controls. Customers should match the light quantity, harness, fuse protection, switchgear, and control method to the vehicle electrical system before installation begins.

The Baja Designs Squadron Pro White Flush Mount LED Auxiliary Light Pod combines compact packaging with controlled illumination and durable Baja Designs construction for customers who expect auxiliary lighting to work through repeated outdoor use. It can support recreational travel, work after dark, remote access, and custom lighting layouts without overwhelming the vehicle with unnecessary bulk. Whether customers are upgrading for marine use, custom panel integration, reverse lighting, or high-output scene illumination, the Baja Designs Squadron Pro White Flush Mount LED Auxiliary Light Pod delivers powerful optical control with a clean white integrated appearance. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: White flush mount high-output LED auxiliary light pod

Brand: Baja Designs

Series: Squadron Pro

Light Output: 4,095 raw lumens per light

Power Draw: 41.4 watts at 3 amps per light

Operating Voltage: 9-36 volts DC

Dimensions: 3.5 inches by 3.5 inches by 2.77 inches

Weight: 0.75 pounds per light

Housing: Hard anodized and powder coated cast aluminum with white gloss finish

Lens: Hardcoated polycarbonate

Beam Patterns: Spot, Driving/Combo, Wide Cornering, and Work/Scene

Lens Colors: Clear and Baja Amber

Mounting Style: Flush mount

Durability: IP69K water resistance, IK10 impact compliance, and testing beyond MIL-STD810G

Rated Life: 49,930 hours

Wiring Harness: Not included with the single light

Functionality:

• Creates a built-in appearance on white or light-colored panels.
• Supports marine, trailer, service-body, and custom vehicle installations.
• Provides forward reach with Spot optics.
• Provides balanced travel lighting with Driving/Combo optics.
• Provides near-field and side coverage with Wide Cornering optics.
• Provides reverse, cargo, camp, and work-area lighting with Work/Scene optics.
• Allows Clear or Baja Amber output to match operating conditions.
• Keeps most of the housing behind the finished mounting surface.

 

---

 

Available Options

The Baja Designs Squadron Pro White Flush Mount LED Auxiliary Light Pod is offered with multiple beam and lens combinations:

• Spot - Focuses output farther ahead for open routes and forward-facing custom panel installations.
• Driving/Combo - Balances distance and surrounding width for mixed terrain and general auxiliary travel lighting.
• Wide Cornering - Spreads light across trail edges, turns, side areas, and low-mounted near-field zones.
• Work/Scene - Creates broad nearby coverage for reverse, cargo, dock, camp, trailer, and service-body tasks.
• Clear Lens - Provides neutral white illumination for general-purpose visibility.
• Baja Amber Lens - Supports contrast and reduced reflected glare in dust, fog, rain, or snow.
• White Gloss Housing - Coordinates with marine surfaces, light body colors, and custom color-matched installations.

Choose Spot or Driving/Combo when the opening faces forward, or choose Wide Cornering or Work/Scene for side, reverse, cargo, and broad utility coverage. Select the lens color that best matches the operating environment.

 

---

 

Why Choose

This product is ideal for customers who want Squadron Pro performance in a white housing that sits cleanly within a panel or bumper.

• Provides high output without an exposed external mounting bracket.
• Coordinates visually with white marine panels and light-colored vehicle surfaces.
• Offers four optical patterns for forward, side, reverse, and work applications.
• Uses rugged housing and lens materials suited to demanding outdoor environments.
• Protects most of the housing behind the panel for a tidy finished installation.
• Allows optical service through replaceable lenses and optics.
• Supports custom single-light or matched multi-light layouts.
• Carries Baja Designs warranty coverage and a satisfaction guarantee under the applicable terms.

 

---

 

What's Included

• One Squadron Pro white flush mount LED light pod in the selected optical configuration
• Flush mount hardware
• Stainless steel mounting hardware
• Product documentation

Note: Confirm included components before installation.

 

---

 

Installation Notes

• A correctly sized cutout is required so the light can sit within the bumper, panel, or fabricated mounting surface.
• Verify panel strength, rear clearance, fastener access, wiring space, drainage, and optical orientation before cutting.
• A wiring harness is not included; select properly rated wiring, fuse protection, switching, and connectors for the chosen quantity.
• Aim and test the light after installation, especially when Spot or Driving/Combo optics face forward.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs provides a limited lifetime warranty for qualifying Squadron Pro defects in materials and workmanship under the applicable terms, along with a 30-day satisfaction guarantee. Replaceable lenses and optics support approved service.

Coverage typically excludes improper panel preparation, incorrect wiring, misuse, unauthorized modification, tampering, neglect, corrosion caused by unsuitable installation practices, and impact damage outside the warranty terms. Proof of purchase may be required.