Baja Designs Security Hardware Kit

 

The Baja Designs Security Hardware Kit adds a theft-deterrent layer to compatible Baja Designs auxiliary lights and light bars by replacing standard exposed mounting hardware with tamper-resistant pieces. It is intended for customers who park, travel, camp, or work with valuable lighting mounted in accessible locations. The hardware helps make quick removal more difficult while preserving the clean mounting arrangement of the lighting system.

Different Baja Designs housings use different fastener sizes and mounting arrangements, so the correct security option is chosen by light series rather than by appearance alone. Options cover compact S2 and Squadron lights, larger OnX6+, S8, XL, and LP lighting, and a 3/8-inch sloped-nut solution for broad compatibility across many lights. Matching the hardware to the exact light and bracket is essential for full thread engagement and secure clamping.

Tamper-resistant hardware is a deterrent, not an absolute guarantee against theft, but it adds time and tool requirements that ordinary hex or socket hardware may not create. This added barrier is valuable on exterior-mounted lighting where the fasteners can be reached from outside the vehicle. It also provides a more deliberate finishing detail for customers who have invested in a complete bumper, roof, chase, or work-light package.

The kit can be used during a new installation or added to an existing compatible setup after fitment and thread size are confirmed. Customers should retain the matching driver tool in a secure location for future aiming, service, or removal. Keeping that tool available is important because routine light adjustment may still require access to the protected fasteners.

Proper security begins with correct hardware length, clean threads, sound brackets, and even clamping force. Security fasteners should not be used to compensate for damaged threads, distorted brackets, or an unstable mounting surface. When installed correctly, they complement the light mounting system without changing beam performance, electrical operation, or the serviceability of the lamp itself.

The Baja Designs Security Hardware Kit is a practical finishing step for daily-driven trucks, off-road vehicles, work rigs, trailers, and powersports builds that spend time away from a locked garage. It protects the mounting investment while keeping the lights available for planned maintenance with the proper tool. Whether customers are upgrading for public parking, remote travel, or added peace of mind around exterior accessories, the Baja Designs Security Hardware Kit delivers a simple layer of tamper resistance. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Tamper-resistant auxiliary-light mounting hardware

Brand: Baja Designs

Available Fitments: S2 and Squadron; OnX6+, S8, XL, and LP Series; broad 3/8-inch sloped-nut applications

Hardware Sizes: M6x16 bolts, 1/4-20x1/2 bolts, or 3/8-inch nuts by selected option

Purpose: Added theft deterrence for compatible exterior lighting

Kit Quantity: One matching security hardware kit

Functionality:

• Replaces easily accessed standard mounting hardware on compatible lights.
• Adds a specialized tool requirement for routine hardware removal.
• Supports security upgrades during a new light installation or on an existing setup.
• Helps protect exterior lighting used on daily drivers, work vehicles, and off-road builds.
• Maintains the original light position when the correct option is installed properly.
• Provides application-specific fastener sizes for different Baja Designs product groups.
• Allows future light aiming and service with the matching driver tool.
• Complements other sensible parking and equipment-security practices.

 

---

 

Available Options

The Baja Designs Security Hardware Kit is available for several mounting systems:

• S2/Squadron M6x16 Bolt Kit - Uses tamper-resistant M6x16 bolts for compatible S2 and Squadron auxiliary-light mounting points.
• OnX6+/S8/XL/LP 1/4-20x1/2 Bolt Kit - Uses tamper-resistant 1/4-20x1/2 bolts for compatible OnX6+, S8, XL, and LP Series lighting.
• 3/8-Inch Tamperproof Nut Kit - Uses sloped 3/8-inch security nuts for compatible mounting studs across much of the Baja Designs lighting range, excluding S1, dome, and rock lights.

Choose the M6 kit for compatible S2 or Squadron lights, choose the 1/4-20 kit for the named light bar and pod series, or choose the 3/8-inch nut kit only where the mounting stud and light application match.

 

---

 

Why Choose

This product is ideal for customers who want added tamper resistance for valuable exterior-mounted Baja Designs lighting.

• Adds an extra removal barrier at accessible light-mounting points.
• Offers dedicated options for several Baja Designs light and light-bar groups.
• Can be installed as part of a new build or added to compatible existing mounts.
• Preserves service access for owners who retain the matching driver tool.
• Provides a compact security improvement without changing light output or beam pattern.
• Helps protect investments on vehicles parked outdoors or used in remote areas.
• Supports a cleaner, more intentional hardware package on finished builds.
• Works alongside sound brackets, correct torque, and sensible vehicle-security practices.

 

---

 

What's Included

• One selected tamper-resistant hardware kit sized for the compatible light application.
• Matching specialty driver hardware when supplied with the selected kit.

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Identify the exact Baja Designs light series, thread size, and bracket arrangement before selecting the kit.
• Inspect all threads and mounting surfaces, then replace damaged hardware before installation.
• Tighten security hardware to the appropriate requirement for the light and bracket without over-tightening.
• Store the matching driver tool securely so the light can be aimed, serviced, or removed later.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs accessories are backed by limited warranty coverage subject to the applicable terms, original condition, and proof-of-purchase requirements.

Warranty coverage typically excludes theft, attempted theft, improper installation, cross-threading, over-tightening, misuse, modification, lost driver tools, or damage to surrounding brackets and vehicle surfaces.