Baja Designs S1 Flush Mount Auxiliary Light Pod for Trucks & Off-Road Vehicles

 

The Baja Designs S1 Flush Mount Auxiliary Light Pod delivers useful LED output from an exceptionally compact housing that installs through a prepared panel opening. Its face sits close to the mounting surface, creating a clean integrated appearance without an exposed pedestal bracket. This format suits customers adding light to bumpers, service bodies, trailers, cargo areas, equipment panels, and custom enclosures where space and finish quality both matter.

The S1 produces 2,320 lumens from a housing measuring approximately 2.1 inches in each direction. A specialized reflector and LED combination shape that output for the selected task, allowing the small light to serve as more than a decorative accent. It can support reverse visibility, area lighting, low-speed trail coverage, or a focused custom lighting zone depending on the chosen optic.

Flush mounting places much of the housing behind the panel, helping protect the finished look and reducing the amount of hardware projecting outward. That arrangement is valuable on rear bumpers, body panels, work compartments, trailers, and equipment where an exposed bracket could snag cargo or interrupt clean exterior lines. The mounting surface must provide enough strength, rear clearance, and access for wiring and service.

Beam choices allow the same compact format to handle different jobs. Spot concentrates output farther away, Wide Cornering spreads light across nearby turns and side areas, and Work/Scene provides broad illumination around a vehicle, campsite, loading zone, or work area. Clear and Baja Amber lens choices further tailor the light for general visibility or improved contrast in dust, fog, rain, and snow.

The hard anodized and powder-coated cast aluminum housing, hardcoated polycarbonate lens, built-in overvoltage protection, and serviceable optics support long-term use in demanding environments. IP69K water resistance, IK10 impact compliance, and testing beyond MIL-STD810G reinforce its suitability for weather, vibration, mud, washdowns, and off-road exposure. Electrical capacity, switchgear, wire protection, and the mounting opening should be planned before cutting the panel.

Whether customers are upgrading for reverse visibility, utility lighting, campsite illumination, or a clean custom installation, the Baja Designs S1 Flush Mount Auxiliary Light Pod delivers compact output with an integrated appearance. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Compact flush mount LED auxiliary light pod

Brand: Baja Designs

Light Output: 2,320 lumens

Power Draw: Approximately 20 watts at 1.42 amps

Operating Voltage: 9-28 volts DC

Dimensions: Approximately 2.1 by 2.1 by 2.1 inches

Mounting Style: Flush mount

Housing: Hard anodized and powder-coated cast aluminum

Lens: Hardcoated polycarbonate

Durability: IP69K water resistance, IK10 impact compliance, and testing beyond MIL-STD810G

Service Features: Built-in overvoltage protection with serviceable lenses and optics

Functionality:

• Adds compact reverse or backup illumination to compatible rear panels and bumpers.
• Provides broad work and utility lighting around vehicles, trailers, and equipment.
• Fits mounting areas where a conventional external pod and bracket would project too far.
• Supports campsite, cargo, loading-zone, and service-body illumination.
• Offers distance, cornering, or scene coverage through selectable optics.
• Allows clear or Baja Amber output to match expected visibility conditions.
• Keeps the front face close to the mounting surface for a clean integrated appearance.
• Supports custom fabrication projects when panel strength and rear clearance are adequate.

 

---

 

Available Options

The Baja Designs S1 Flush Mount Auxiliary Light Pod is available with meaningful choices in beam pattern, lens color, and housing finish:

• Spot - A concentrated pattern for distance-focused auxiliary lighting from a properly aimed position.
• Wide Cornering - Broad near-field coverage for turns, trail edges, reverse use, and low-speed travel.
• Work/Scene - Wide area illumination around a vehicle, campsite, loading zone, or work area.
• Clear Lens - Neutral daylight-like output for general-purpose visibility and utility use.
• Baja Amber Lens - Warmer output for added contrast and reduced reflected glare in dust, fog, rain, or snow.
• Black Housing - A dark finish that blends with many bumpers, body panels, and equipment enclosures.
• White Housing - A light finish for marine, color-matched, or light-colored custom installations.

Choose Spot when distance is the priority, Wide Cornering for broad near-field or reverse coverage, or Work/Scene for area illumination. Select Clear for neutral output or Baja Amber when contrast and reduced reflected glare are more important.

 

---

 

Why Choose

This product is ideal for customers who want a discreet flush installation with serious output from a very small housing.

• Delivers useful illumination in spaces that cannot comfortably accept a larger external pod.
• The low-profile face supports clean bumper, body-panel, trailer, and equipment installations.
• Purpose-shaped optics let customers choose distance, cornering, reverse, or scene coverage.
• Rugged housing and lens materials support vibration, weather, impact, and washdown exposure.
• Predictable electrical demand suits carefully planned single-light and multi-light systems.
• Serviceable lenses and optics allow the lighting function to evolve over time.
• Built-in overvoltage protection supports a properly designed electrical installation.
• The compact format works well for trucks, SUVs, UTVs, trailers, work vehicles, and custom builds.

 

---

 

What's Included

• One Baja Designs S1 flush mount LED light pod.
• Flush mount hardware for the selected light.
• Stainless steel mounting hardware.
• Product documentation when supplied with the light.

Note: Confirm included components before installation.

 

---

 

Installation Notes

• A prepared panel opening is required, and the surrounding material must provide adequate strength and rear clearance.
• Check the mounting surface, wiring path, fastener access, and beam orientation before cutting or drilling.
• A wiring harness is not included with a single light and must be selected for the planned electrical layout.
• Aim and test the light after installation so the selected optic supports the intended reverse, utility, scene, or off-road task.

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Baja Designs commonly backs the S1 with a limited lifetime warranty covering qualifying defects in materials and workmanship under the warranty terms.

The S1 is also commonly supported by a 30-Day Satisfaction Guarantee. Coverage generally excludes improper installation, misuse, unauthorized modification, unsuitable electrical connections, tampering, or impact damage outside warranty terms, and proof of purchase may be required.