Baja Designs CAN-BUS Anti-Flicker Wiring Harness is designed for vehicle-specific lighting kits that use factory fog-light wiring and experience flicker caused by the vehicle's monitored electrical system. The harness installs in line with the compatible plug-and-play adapters already used by the kit. Its role is to help create a stable trigger path for the added lights.
Modern vehicles can monitor bulb load and circuit behavior in ways that conflict with auxiliary LED lighting. The result may be pulsing, flickering, or inconsistent activation even when the lamps and main harness are otherwise connected correctly. An anti-flicker interface addresses that interaction without requiring customers to abandon the factory fog-light trigger strategy.
Two-pin connections match the intended inline arrangement, while the harness supports up to 150 watts. The lights remain triggered from the plug-and-play adapter in the compatible vehicle-specific kit. Correct load planning is important because the combined lighting demand must stay within the harness rating.
The harness is intended as a targeted solution for CAN-BUS interference rather than a universal cure for every lighting fault. Loose grounds, damaged connectors, incorrect polarity, undersized wiring, and overloaded circuits can create similar symptoms and should be checked during diagnosis. Customers should verify that the flicker appears within a compatible factory-fog wiring setup before adding the interface.
Inline installation keeps the anti-flicker component close to the existing adapter path and avoids unnecessary changes to the main light harness. Protected routing and secure connectors help preserve reliability in bumper and fog-pocket locations exposed to moisture, debris, and vibration. The harness does not include a switch or mounting hardware.
Whether customers are correcting pulsing auxiliary fog lights or stabilizing a monitored factory trigger circuit, the Baja Designs CAN-BUS Anti-Flicker Wiring Harness delivers a purpose-built inline solution. Now Available at LEER!
Features & Specifications
Product Type: CAN-BUS anti-flicker wiring harness
Brand: Baja Designs
Application: Compatible vehicle-specific kits using factory fog-light wiring
Connector Type: Two-pin connections
Maximum Rating: 150 watts
Switch Included: No
Functionality:
- Installs in line with compatible factory fog-light adapter wiring
- Helps reduce flicker associated with CAN-BUS circuit monitoring
- Allows auxiliary lights to remain triggered by the plug-and-play kit adapters
- Supports lighting loads up to 150 watts
- Uses two-pin connections for the intended harness interface
- Preserves the basic layout of the existing vehicle-specific light kit
- Provides a targeted electrical interface for monitored fog-light circuits
Why Choose
This product is ideal for customers who want a purpose-built way to address LED flicker in a compatible factory-fog-light-triggered Baja Designs installation.
- Inline installation limits changes to the existing harness layout
- The 150-watt rating supports many compact auxiliary lighting combinations
- Two-pin connections match the intended adapter path
- The harness keeps factory fog-light triggering available
- A dedicated interface is cleaner than improvised resistors or loose electrical components
- Universal use within compatible kits supports several vehicle applications
- The solution focuses on a common interaction between LED lights and monitored circuits
What's Included
- One CAN-BUS anti-flicker two-pin wiring harness
Note: Confirm included components before installation.
Installation Notes
- Confirm the lighting kit uses compatible factory fog-light plug-and-play adapters and that the symptom is related to circuit monitoring.
- Keep the total connected lighting load at or below 150 watts.
- Inspect grounds, connectors, polarity, and fuse condition before attributing all flicker to CAN-BUS interference.
- Secure the inline harness away from exhaust heat, sharp edges, moving components, and direct impact exposure.
Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.
Warranty Information
Warranty coverage is handled under Baja Designs terms for the purchased component. Coverage generally applies to defects in materials or workmanship and may require proof of purchase, product inspection, and return authorization before a claim is completed.
Coverage typically excludes improper installation, incorrect wiring, misuse, unauthorized modification, overloading, tampering, impact damage, corrosion caused by unsuitable installation practices, and use outside the component's intended application.
