Baja Designs 20 Inch Cradle Light Mount

 

Baja Designs 20 Inch Cradle Light Mount creates a universal support structure for a compatible 20-inch OnX6 or S8 light bar. The U-shaped cradle positions the bar between side supports and adds a center mounting point, giving customers a coordinated foundation when a vehicle-specific bracket is not available. This approach is useful for bumpers, racks, equipment structures, and custom fabrication projects where the installer can provide a strong, correctly spaced mounting surface.

Two adjustable mounting positions work with one solid center position to help the cradle adapt to the selected application. The layout can simplify alignment by supporting the light across multiple points rather than relying only on the end brackets. Customers should still measure the light, cradle, vehicle structure, and available clearance before drilling because universal fitment depends on the host installation.

The mount is intended for 20-inch Baja Designs OnX6 and S8 light bars, allowing customers to choose the light-bar technology and beam configuration that suit the build. The cradle itself does not change the light output or electrical requirements, so wiring, switching, fuse, relay, and power capacity must be selected for the installed bar. Airflow, cooling, beam height, front-camera views, sensors, winch access, and grille openings should remain unobstructed.

Stainless steel mounting material supports exposed use, while the multi-point design can provide a stable platform when attached to a rigid vehicle or equipment structure. The center support should contact only the intended mounting area and must not place harmful stress on the light housing. Fastener grade, backing plates, surface thickness, corrosion protection, and torque all contribute to the strength of a universal installation.

A careful test fit helps establish the final position before permanent holes are made. Customers should check hood, tailgate, door, roof, cargo, and recovery-equipment movement as applicable, then route wiring away from sharp edges, heat, and moving components. After installation, the light should be aimed, all fasteners should be tightened evenly, and the mounting points should be inspected again after initial road or trail use.

The cradle mount supports custom trucks, SUVs, work vehicles, overland systems, trailers, powersports support equipment, and other builds that can provide a strong 20-inch mounting location. Its adjustable side positions and solid center point give installers flexibility while maintaining a coordinated light-bar support structure. Whether customers are upgrading for forward trail lighting, work-site visibility, overland travel, or a custom bumper build, the Baja Designs 20 Inch Cradle Light Mount delivers universal support for compatible OnX6 and S8 light bars. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Universal 20-inch U-cradle light-bar mount

Brand: Baja Designs

Compatible Light Bars: 20-inch OnX6 or 20-inch S8

Mounting Positions: Two adjustable positions and one solid center position

Material: Stainless steel

Application: Universal custom installation on a suitable structure

Functionality:

• Supports a compatible 20-inch OnX6 or S8 light bar
• Adds multi-point support through side and center mounting positions
• Allows adjustable positioning for varied custom structures
• Creates a coordinated cradle around the light bar
• Supports bumper, rack, equipment, and fabrication-based installations
• Keeps the light removable and serviceable when installed with suitable hardware
• Provides a universal option when a vehicle-specific bracket is not available

 

---

 

Why Choose

This product is ideal for customers who want a universal multi-point cradle for a compatible 20-inch light bar.

• Compatible with two popular Baja Designs 20-inch light-bar groups
• Adjustable side positions help adapt the mount to custom structures
• Solid center position adds another support point
• Cradle layout creates a balanced, integrated appearance
• Universal format supports varied vehicle and equipment builds
• Stainless steel construction suits exposed mounting locations
• Multi-point support can improve stability when attached to a strong foundation

 

---

 

What's Included

• One Baja Designs 20 Inch Cradle Light Mount
• Cradle mounting hardware supplied with the selected product

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Test-fit the cradle and light bar on a rigid structure before drilling permanent holes
• Confirm clearance for airflow, cameras, sensors, winch access, grilles, panels, cargo, and moving vehicle parts
• Use suitable backing, fasteners, corrosion protection, and torque for the mounting surface
• Route the light-bar wiring away from sharp edges, heat, movement, and pinch points, then recheck fasteners after initial use

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Warranty coverage is subject to Baja Designs terms in effect at the time of purchase and may require proof of purchase. Coverage typically excludes improper installation, misuse, modification, electrical faults, overloading, tampering, impact damage, and use outside the intended application.

Customers should inspect the accessory and the surrounding installation periodically, especially after off-road travel, vibration, weather exposure, or changes to the lighting system. Correct routing, secure fasteners, compatible connectors, and proper electrical capacity help preserve reliable operation.