Baja Designs 2-Light Splitter Harness

 

Baja Designs 2-Light Splitter Harness gives customers a purpose-built way to branch one compatible lighting connection into two outputs. The available versions cover compact Squadron, S2, and S1 lights as well as OnX6, S8, and XL lighting groups, with standard and 55-inch layouts for different spacing needs. A four-pin Deutsch option also supports compatible Squadron 2.0 systems that use backlight integration.

A splitter is useful when two lights should operate together from one properly sized main harness, relay, fuse, and control circuit. Common layouts include paired bumper pods, two cornering lights, matched rack lights, dual rear work lights, or two compatible bars positioned in separate locations. The splitter organizes the branch connections, but the electrical capacity still depends on the complete system and the combined load of both lights.

Connector selection is critical because Baja Designs lighting groups use different electrical connections and functions. Two-pin versions support compatible Squadron, S2, and S1 products, three-pin versions support selected OnX6, S8, and XL products, and the four-pin Deutsch version is intended for compatible Squadron 2.0 lighting with backlight capability. Customers should compare connector count, keyed shape, light series, and control features before choosing an option.

Standard splitters work well when the two light connections are relatively close together, while 55-inch splitters add branch length for wider bumpers, racks, cages, roofs, trailers, and separated equipment positions. Added length should follow protected structure rather than crossing open gaps under tension. Excess harness should be secured in broad loops with strain relief and kept away from heat, sharp metal, steering, suspension, fans, belts, and cargo movement.

The prefabricated format can improve serviceability compared with a hand-built branch because compatible connectors allow lights to be disconnected without cutting the main harness. It also supports a cleaner finished appearance and more consistent weather protection when every connection is fully seated and secured. The splitter should not be used to exceed the wattage, amperage, fuse, relay, or conductor limits of the main harness.

This accessory supports daily drivers, work vehicles, overland builds, powersports equipment, trailers, and custom lighting installations that use two compatible lights together. Choosing the correct connector group and branch length creates a more dependable installation than adapting a mismatched harness. Whether customers are upgrading for paired forward pods, cornering lights, rear work lighting, or a wide rack layout, the Baja Designs 2-Light Splitter Harness delivers organized dual-light connectivity across several lighting groups. Now Available at LEER!

 

---

 

Features & Specifications

Product Type: Two-light auxiliary lighting splitter harness

Brand: Baja Designs

Connector Options: Two-pin, three-pin, or four-pin Deutsch depending on selection

Branch Options: Standard or 55-inch layouts depending on selection

Application: Two compatible Baja Designs lights on one properly sized main circuit

Switch: Not included

Functionality:

• Branches one compatible lighting input into two outputs
• Supports paired forward, cornering, side, rear, rack, and work-light layouts
• Offers connector choices for several Baja Designs light groups
• Provides extended 55-inch versions for wider spacing
• Preserves plug-style serviceability when connectors match
• Organizes wiring compared with improvised branch connections
• Works within the limits of a correctly sized main harness and electrical system

 

---

 

Available Options

The Baja Designs 2-Light Splitter Harness is available in multiple configurations:

• Squadron/S2 55-Inch Two-Pin Splitter - Adds a long branch for two compatible Squadron or S2 lights positioned farther apart.
• Squadron/S2/S1 Two-Pin Splitter - Provides a compact prefabricated branch for two compatible Squadron, S2, or S1 lights.
• OnX6/S8/XL Three-Pin Splitter - Branches one compatible three-pin connection to two selected OnX6, S8, or XL lights.
• OnX6/S8/XL 55-Inch Three-Pin Splitter - Adds extended spacing for two compatible three-pin lights mounted farther apart.
• Squadron 2.0 Four-Pin Deutsch 55-Inch Splitter - Splits one compatible four-pin Squadron 2.0 input into two outputs while retaining the connection format used for backlight integration.

Choose the two-pin option for compatible Squadron, S2, and S1 lights, the three-pin option for compatible OnX6, S8, and XL lights, or the four-pin Deutsch option for compatible Squadron 2.0 systems; choose a 55-inch version when the two lights require wider branch spacing.

 

---

 

Why Choose

This product is ideal for customers who want a clean plug-style branch for two compatible Baja Designs lights.

• Multiple connector formats support distinct lighting groups and functions
• Standard and extended branches address compact or wide mounting layouts
• Prefabricated connections simplify service and future light removal
• Purpose-built routing improves the finished appearance of the installation
• Paired-light control supports balanced beam placement
• Four-pin option preserves the intended Squadron 2.0 connection format
• Separate options reduce the need for connector adapters and improvised splices

 

---

 

What's Included

• One Baja Designs 2-Light Splitter Harness in the selected connector and branch configuration

Note: Confirm included components before installation.

 

---

 

Installation Notes

• Match the connector count, keyed shape, light series, and control functions before installation
• Calculate the combined load of both lights and confirm the main harness, fuse, relay, switch, wiring, and power source are adequate
• Route both branches with abrasion protection and strain relief, away from heat and moving parts
• Fully seat and secure all connectors before testing both lights and any backlight function

Buyer is responsible for use in accordance with applicable vehicle, road, off-road, towing, racing, and local laws.

 

---

 

Warranty Information

Warranty coverage is subject to Baja Designs terms in effect at the time of purchase and may require proof of purchase. Coverage typically excludes improper installation, misuse, modification, electrical faults, overloading, tampering, impact damage, and use outside the intended application.

Customers should inspect the accessory and the surrounding installation periodically, especially after off-road travel, vibration, weather exposure, or changes to the lighting system. Correct routing, secure fasteners, compatible connectors, and proper electrical capacity help preserve reliable operation.